AWR Design Forum 2012 off to a Successful Start

Japan, Korea, and Taiwan Venues Draw Hundreds of Users, Papers are Excellent  

EL SEGUNDO, Calif. - August 13, 2012 -  AWR Corporation, the innovation leader in high-frequency EDA software, has concluded a successful Asian tour of the AWR Design Forum (ADF) with record registrations and hundreds in attendance. Kicking off on July 6 in Tokyo, the tour moved to Korea on July 10 and wrapped up in Taiwan on July 12. Excellent papers were presented by AWR customers, partners, and academics.

ADF is an open event at which designers of microwave and RF circuits and systems such as monolithic microwave integrated circuit (MMIC), RF printed circuit board (RF PCB) and LTE communication systems can network and share useful information and resources pertinent to high-frequency design, discuss AWR products and technologies, and collaborate on industry issues and trends.

Customer papers presented, by venue, as listed below are also found online at  www.awrdesignforum.com

Japan             

  • Z/Y/S-Parameter-Friendly Formulas for Q Factor Estimation
    • Dr.Takashi Ohira of Toyohashi University of Technology
  • Wireless Power Transmission Using GaN SBD
    • Dr. Yasuo Ohono - Tokushima University
  • Efficient Utilization of RF/Microwave Circuit Simulator
    • Yuichi Ichikawa - I-Laboratory
  • Introduction of a GaN Amplifier DesignUsing AWR
    • Dr. Eigo Kuwata - Mitsubishi Electric Corporation
  • Microwave OfficeTM and CR-8000
    • Naoki Hata - ZUKEN INC
  • New Switch Non-Linear ModelDevelopment
    • Ms. Maya Chai - WIN Semiconductors Corporation

Korea             

  • AWR Software for Microwave Circuit and System Classes
    • Prof. Kang-Wook Kim - Kyungpook National University
  • Design of a High-Efficiency Power Amplifier with Accurate EM Modeling
    • Prof. Young-Cheol Park - Hankuk University
  • Evaluation of a Power Amplifier Fixture Board Using AWR's Simulators
    • Sang-No Lee - Samsung Electronics
  • MMIC Oscillator Design Using Microwave Office and AXIEM®
    • DR. Hyun Jin Kim - ARD Technologies Inc.
  • Streamline your Design to Test Flow Without the Integration Work
    • David A. Hall - National Instruments
  • Design and Simulation of Modern Radar Systems
    • Dr. Gent Paparisto - AWR Corporation

Taiwan

  • Circuit Design In an Ultra Low Temperature Environment
    • Dr. Chau-Ching Chiong - ASIAA
  • AWR's Visual System SimulatorTM in Base Station PA Modeling for LTE and 802.11ac
    • Dr. Gent Paparisto and David Hall - AWR Corporation and National Instruments
  • Design of a Novel Multi-Slot Antenna in AXIEM
    • Dr. Milton Lien - AWR Corporation
  • Optimizing the Design and Verification of 4G RF Power Amplifiers
    • Dr. Gent Paparisto and Josh Moore - AWR Corporation
  • Fully Integrating AnalystTM 3D EM Simulation into the Circuit Simulator Environment
    • Dr. John Dunn - AWR Corporation
  • Electrical/Thermal Coupled Solutions for MMIC Designs
    • Dr. John Dunn - AWR Corporation 

ADF continues in the coming months with two venues in China-Xi'an on September 25 and Chengdu on September 27. Details on the agenda, registration, and the call for papers can also be found at www.awrdesignforum.com.  

Following Asia, ADF will tour Europe throughout the autumn with the following locations already confirmed:

ADF Europe:

  • Eindhoven, The Netherlands - 19 September
  • Horsholm, Denmark - 4 October (in conjunction with NIDays)
  • Madrid, Spain - 4 October
  • Stockholm, Sweden - 10 October
  • Gothenburg, Sweden - 11 October
  • Helsinki, Finland - 31 October (in conjunction with NIDays)
  • Rome, Italy - 6 November
  • Milan, Italy - 8 November
  • As part of the NI/AWR Design to Test Symposium:
    • Hitchin, United Kingdom - 11 September
    • Newbury, United Kingdom - 13 September
    • Paris, France - 27 November

More information about ADF Europe and the currently open Call for Papers can be found at  http://www.awrdesignforum.com/call-for-papers-europe.html. Abstracts are due by August 17.

About AWR 
AWR, the innovation leader in high-frequency EDA software, dramatically reduces development time and cost for products employed in wireless, high-speed wired, broadband, aerospace and defense, and electro-optical applications.

Visit AWR at:  AWR.TVAWR BlogsRSSFacebookTwitterYouTube, and LinkedIn

Contact:  
Sherry Hess 
Vice President of Marketing
AWR Corporation
(310) 726-3000
Email Contact   

 

 

 

 

Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Ansys’ John Lee on Cultivating Trust within his Team
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
The Role of the Portable Stimulus Standard in VLSI Development
Jobs
Senior CAD Engineer for Nvidia at Santa Clara, California
Technical Staff Engineer - Hardware (FPGA) for Microchip at San Jose, California
Mechanical Design Engineer for Apple Inc at Cupertino, California
FPGA Design Verification Engineer for General Dynamics Mission Systems at Dedham, Massachusetts
Electrical Engineer - ASIC/FPGA for General Dynamics Mission Systems at Florham Park, New Jersey
Hardware Development Engineer - (PCB) for Cisco Systems Inc at Austin, Texas
Upcoming Events
SEMICON Southeast Asia 2024 at MITEC Kuala Lumpur Malaysia - May 28 - 30, 2024
3D & Systems Summit - Heterogeneous Systems for the Intelligently Connected Era at Hilton Dresden Hotel An der Frauenkirche 5, 01067 Dresden Germany - Jun 12 - 14, 2024
2024 IEEE Symposium on VLSI Technology & Circuits at HILTON HAWAIIAN VILLAGE HONOLULU HI - Jun 16 - 20, 2024
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise