University of Colorado and SRC Research Accelerates Microscopic Imaging for Next-Generation Nanoelectronics

Research Leverages Powerful Tabletop Microscope with Coherent EUV Light to Enable 20x Improvement in Spatial Resolution

RESEARCH TRIANGLE PARK, N.C. — (BUSINESS WIRE) — August 27, 2015 — University of Colorado researchers sponsored by Semiconductor Research Corporation (SRC), the world’s leading university-research consortium for semiconductor technologies, have developed new microscopic imaging techniques to help advance next-generation nanotechnology in applications ranging from data storage to medicine.

The research focuses on leveraging powerful tabletop microscopes equipped with coherent beams of extreme-ultraviolet (EUV) light. Traditional scanning electron and atomic force microscopy techniques can damage a sample. The University of Colorado’s approach promises quantitative full-field imaging with as much as a 20x improvement in spatial resolution, ultimately resulting in smarter, more energy-efficient nanocircuit designs.

“Better imaging techniques are critical for all areas of science and advanced technology, and current imaging techniques have not reached their fundamental limits in terms of spatial and temporal resolutions, dose, speed or chemical sensitivity,” said Margaret Murnane, professor of Physics and Electrical and Computer Engineering at the University of Colorado, Boulder. “Tabletop microscopes are needed for iterative design and optimization across a broad range of nanoscience and nanotechnology applications, as we work as an industry to continue to advance Moore’s Law.”

Until recently, the resolution of X-ray microscopes was severely limited by diffractive optics. Although 10 nanometer (nm) spatial resolution was demonstrated, 25 nm is typical – nowhere near the wavelength limit, according to the research team. Electron microscopies cannot simultaneously achieve high spatial and temporal resolution. Opaque, disordered or scattering samples that are common in chemistry, materials and biology present a formidable challenge using any imaging modality. Notable demonstrations aside, current X-ray, electron and optical microscopies are simply too cumbersome and slow to routinely image functioning systems in real space and time, severely limiting progress.

Murnane explains that new coherent, short wavelength light sources fill the critical need for metrology to bridge this gap. As an example, although the Ruby laser was first demonstrated 55 years ago (which emitted coherent beams in the red region of the spectrum at 694 nm), the shortest wavelength laser in widespread use is the excimer laser around 193 nm. This means that in 55 years, the wavelength of widely accessible lasers has been reduced by less than a factor of 4.

The University of Colorado’s work employs coherent, or laser-like, beams of EUV light with wavelength at 30 nm nearly an order of magnitude shorter that the excimer, achieving very high-contrast images with a resolution of 40 nm laterally and 5 angstrom (Å) vertically, representing a technology poised to change the industry.

Further leveraging advantages of the tabletop model, the University of Colorado team plans to demonstrate in the next two to five years coherent EUV and X- ray microscopes that produce real-time movies of functioning materials with less than 5 nm lateral resolution and 1 Å vertical resolution in 3D.

The team’s deep-ultraviolet and EUV laser-like source technology could be used for defect detection or other nanometrology applications — either as a stand-alone solution or as an inline tool. The EUV microscope could also provide high-contrast, low-damage, full-field, real-time imaging of functioning circuits and nanosystems, among other fabrication application usages.

“Many industries that harness nanotechnologies can benefit from better microscopes for iterative and smart designs,” said Kwok Ng, Senior Science Director of Nanomanufacturing Materials and Processes at SRC. “The resolution will only continue to improve as the illumination wavelengths decrease.”

For more information on the research, visit http://www.sciencedirect.com/science/article/pii/S0304399115300115.

About SRC

Celebrating more than 30 years of collaborative research for the semiconductor industry, SRC defines industry needs, invests in and manages the research that gives its members a competitive advantage in the dynamic global marketplace. Awarded the National Medal of Technology, America’s highest recognition for contributions to technology, SRC expands the industry knowledge base and attracts premier students to help innovate and transfer semiconductor technology to the commercial industry. For more information, visit https://www.src.org/.



Contact:

Integrity Global for SRC
Dan Francisco, 916-812-8814
Email Contact

Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Ansys’ John Lee on Cultivating Trust within his Team
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
The Role of the Portable Stimulus Standard in VLSI Development
Jobs
Hardware Development Engineer - (PCB) for Cisco Systems Inc at Austin, Texas
Design Verification Engineer for Blockwork IT at Milpitas, California
Electrical Engineer - ASIC/FPGA for General Dynamics Mission Systems at Florham Park, New Jersey
Physical Design Engineer (Multiple Openings) for Samsung Electronics at Austin, Texas
Senior Staff Engineer for Samsung Electronics at San Jose, California
Senior SOC Design Engineer for Nvidia at Santa Clara, California
Upcoming Events
SEMICON Southeast Asia 2024 at MITEC Kuala Lumpur Malaysia - May 28 - 30, 2024
3D & Systems Summit - Heterogeneous Systems for the Intelligently Connected Era at Hilton Dresden Hotel An der Frauenkirche 5, 01067 Dresden Germany - Jun 12 - 14, 2024
2024 IEEE Symposium on VLSI Technology & Circuits at HILTON HAWAIIAN VILLAGE HONOLULU HI - Jun 16 - 20, 2024
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise