Mentor Graphics and Carbon Design Systems Partner for Model Distribution

ACTON, MA -- (MARKET WIRE) -- Apr 05, 2011 -- Carbon Design Systems™, the leading supplier of solutions for architectural analysis, performance optimization and pre-silicon firmware debug, and Mentor Graphics Corporation announced today the availability of Mentor's 8051 microcontroller family on Carbon's IP Exchange web portal.

These models are 100% accurate and feature a link with the Keil™ µVision® IDE and debugger by ARM® to enable interactive software debug.

Accurate Models Speed Development Schedule

"The 8051 remains a widely used microcontroller," stated Bill Neifert, chief technical officer at Carbon Design Systems. "They are often used in designs that have tight time-to-market pressures and can ship in massive volumes. By partnering with Mentor and a joint customer to deliver Carbonized versions of the 8051 microcontroller, we are enabling designers to develop their firmware and ROM code in advance of silicon availability and shorten their development schedules."

About the Models

Carbon's models of the 8051, 8051W and 8051EW microcontrollers from Mentor are compiled directly from the implementation register transfer level (RTL) code. These models integrate directly with Carbon's SoC Designer Plus virtual platform and can also execute in any leading RTL simulator. Each model can be interactively debugged using a direct integration with Keil's uVision Debugger. Each model also integrates directly with Mentor's Questa Codelink to further simplify debug.

Immediate Availability

Models of the Mentor Graphics 8051, 8051W and 8051EW are available today from Carbon's IP Exchange web portal: www.carbonipexchange.com.

About Carbon Design Systems

Carbon offers the industry's only unified virtual platform solution along with the leading solution for accurate IP model creation. Carbon virtual platforms can execute at 100s of MIPS and with 100% accuracy to enable application software development, detailed architectural analysis and secure IP model distribution. Carbon's solutions are based on open industry standards, including SystemC, IP-XACT, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking, and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: (978) 264-7300. Facsimile: (978) 264-9990. Email: Email Contact. Website: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

For more information, contact:
Bill Neifert
Vice President of Business Development
Carbon Design Systems
(978) 264-7302

Email Contact 


Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Ansys’ John Lee on Cultivating Trust within his Team
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
The Role of the Portable Stimulus Standard in VLSI Development
Jobs
FPGA Design Verification Engineer for General Dynamics Mission Systems at Dedham, Massachusetts
RF Design Engineer for Blockwork IT at San Francisco, California
Senior Staff Engineer for Samsung Electronics at San Jose, California
Electrical Engineer - ASIC/FPGA for General Dynamics Mission Systems at Florham Park, New Jersey
Physical Design Engineer (Multiple Openings) for Samsung Electronics at Austin, Texas
Mechanical Design Engineer for Apple Inc at Cupertino, California
Upcoming Events
SEMICON Southeast Asia 2024 at MITEC Kuala Lumpur Malaysia - May 28 - 30, 2024
3D & Systems Summit - Heterogeneous Systems for the Intelligently Connected Era at Hilton Dresden Hotel An der Frauenkirche 5, 01067 Dresden Germany - Jun 12 - 14, 2024
2024 IEEE Symposium on VLSI Technology & Circuits at HILTON HAWAIIAN VILLAGE HONOLULU HI - Jun 16 - 20, 2024
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise