Login

 CAST, Inc. 
Part Number : H264-E-MPS
Short Desc. : Low-Power AVC/H.264 Main Profile Encoder Core
Overview :

The H264-E-MPS IP core is a video encoder supporting the Main Profile of the ISO/IEC 14496-10/ITU-T H.264 standard. It Implements an energy-efficient hardware encoder that is optimized for ultra-low-latency video streaming at low bit rates.

The H264-E-MPS encoder requires less than half the silicon area of most competing hardware encoders—under 250K gates—allowing for very cost-effective ASIC or FPGA implementations. Its small silicon footprint, low external memory bandwidth requirements, and zero software overhead enable H.264 coding at an extremely low energy cost.

Despite being small, the H264-E-MPS produces high quality video, especially at low bit-rates, and is suitable for systems with low latency requirements. It uses constant quantization to output video streams of Variable Bit-Rate (VBR), or automatically regulates quantization multiple times within a frame to output Constant Bit-Rate (CBR) streams. In CBR mode it responds rapidly to temporal or spatial changes in the video content. This can be combined with an artifacts-free Intra-Refresh coding implementation to effectively eliminate bit-rate peaks, while preserving the periodic intra-coded references. As a result, the stream buffers can be smaller than those typically required, and the end-to-end latency can be brought down to frame or sub-frame levels. Video quality at  low-bit rates is preserved, as the encoder intelligently uses block-skipping and quantization coefficient thresholding to reduce bit rate at minimal quality loss, and uses the in-loop deblocking filter to eliminate the blocking artifact.

The core was designed for ease of use and integration. Once initially programmed, it operates without any assistance from the host processor. The encoder’s memory interface is extremely flexible: it operates on a separate clock domain, is independent from the external memory type and memory controller, and is tolerant to large latencies. The core is optionally delivered with a raster-to-block converter, and wrappers for AMBA® AHB, AXI, or AXI-Streaming buses are available.   

Customers can further decrease their time to market by using CAST’s integration services to receive complete video encoding subsystems. These integrate the encoder core with video and networking interface controllers, networking stacks, or other CAST or third-party IP cores.

The H264-E-MPS IP core is designed using with industry best practices. Its deliverables include a complete verification environment and a bit-accurate software model.


Features : - Low power AVC/H.264 encoder, with small silicon footprint and optimized for low-latency, low-bit-rate video streaming; multiple times production proven
- Standard Support
- ISO/IEC 14496-10/ITU-T H.264 Main Profile specification
- Output Annex B NAL byte stream decodable by Main and High Profile decoders
- Input Video Formats
- Progressive or Interlaced, 4:2:0 YCbCr input with 8 bits per color sample
- Single-channel SD, ED and HD capable even in low-cost FPGAs
- Optional multichannel encoding
- Low Latency and Low Bit Rates with Fewer Artifacts
- Constant Bit-Rate (CBR) output for smaller stream buffers and end-to-end latency
- Advanced rate control regulates Qp multiple times within a frame, and rapidly responds to temporal or spatial video variations
- Artifacts-free Intra-Refresh eliminates bit-rate peaks of I frames
- Block skipping, quantized coefficients thresholding, and in-loop deblocking filter improve quality at low bit rates
- Small and Low Power
- Less than 250 KGates and 150 kbits of RAM
- Uses less power than competitive hardware H.264 encoders thanks to having under half their silicon footprint and small external memory bandwidth.
- Consumes much less power than any equivalent software, or software-hardware encoder
- Ease of Integration
- Zero CPU overhead, stand-alone operation
- Flexible external memory interface uses separate clock, is independent of memory type and tolerant to latencies
- AMBA® Interface Options: DMA-capable AMBA® AHB, AXI or AXI-Streaming
Categories :
Tags : Low-Power AVC/H.264 Main Profile Encoder Core
Maturity : Now
Portability :
Type : Soft
Deliverables : - Source-code HDL (Verilog or VHDL) (ASICs) or as a targeted netlist (FPGAs)
- Sophisticated self-checking Testbench
- Synthesis scripts
- Simulation script, vectors and expected results
- Software (C++) Bit-Accurate Model and test-vector generator

- Comprehensive user documentation
TrueCircuits:



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise