BitSim AB 
Part Number : Bit-MIPI CSi-2
Short Desc. : Camera Sensor Receiver Interface Converting from MIPI CSI-2 to AXI4-Stream Video Standard
Overview :

The BitCsi2Rx IP is a receiver for camera sensor signals, to be used in an FPGA or ASIC. 
It receives camera signals in accordance with the MIPI CSI-2 and D-PHY specifications. BitCsi2Rx converts these signals to parallel video signals for AXI4- Stream Video standard. To make it easier to interface BitCsi2Rx with various other design blocks, it also outputs fval (frame valid) and lval (line valid) signals for synchronization. 

A MIPI CSI-2 transmitter IP is also available from BitSim, BitCsi2Tx. 

Features : - 1 to 4 data lanes
- Number of data lanes can be configured statically at synthesis time and dynamically during run-time
- Supported CSI-2 Primary Data Types: like RAW8/10, YUV422_8, RGB888, Generic, User Defined
- AXI4-Stream Video output with additional synchronization signals
- Virtual Channel Support
- ECC checking and correction for packet headers and short packets
- Checksum checking for packet payload data
- D-PHY protocol decoding included
- Clock-lane/data-lanes deskew
- Full High Speed/Low Power mode support
- Test/debug features
- Written in VHDL, prepared for instantiation in Verilog or SystemVerilog design
Categories :
Tags : MIPI CSI-2
Maturity : Products are out on the market
Portability :
 FPGA Technologis 
Altera :
Arria 10
Xilinx :

Type : Soft
Deliverables : - Encrypted or readable source code
- VHDL test benches and scripts
- HW-platform/reference kit available

© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise