Login

 Synopsys 
Part Number : dwc_usb2_femtophy_otg_tsmc
Short Desc. : USB 2.0 femtoPHY in TSMC (40nm, 28nm, 22nm, 16nm, 12nm, 10nm, 7nm)
Overview :
The Synopsys DesignWare ® USB 2.0 femtoPHY provides designers with a complete physical (PHY) layer IP solution for low-power mobile and consumer applications such as smartphones, tablets, digital TVs, and media players. Offering reduced silicon cost and longer battery life, the DesignWare USB 2.0 femtoPHY IP delivers 50% smaller die area and minimizes active and suspend power consumption. The DesignWare USB 2.0 femtoPHY implements the latest USB battery charger version 1.2 and USB On-The-Go (OTG) version 2.0 specifications from the USB Implementer ’s Forum (USB-IF). Architected for the industry ’s most advanced 1.8V process technologies, the USB 2.0 femtoPHY is designed with features created to minimize effects due to variations in foundry process, device models, packages, and board parasitics. The DesignWare USB 2.0 femtoPHY builds on years of customer success with Synopsys ’ silicon-proven USB PHY IP product line, which has been ported to over 100 process nodes and configuration combinations ranging from 180-nm to 14-nm. When combined with the DesignWare Host, Device or On-The-Go (OTG) digital controllers and verification IP, the DesignWare USB 2.0 femtoPHY delivers a complete low power and small die area solution for advanced system-on-chip (SoC) designs.
Features : - Designed for advanced 1.8V CMOS planar bulk and FinFET process nodes
- Supports the USB 2.0 480 Mbps protocol and data rate (high-speed)
- Backwards compatible with USB 1.1 operating at 1.5 Mbps (low-speed) and 12 Mbps (full-speed) Integrates high-speed, mixed-signal custom CMOS circuitry designed to the UTMI+ Level 3 specification Can be used in USB device, host, or on-the-go applications
- USB-IF Certified
- Supports USB Type-C ™ connector standard
Categories :
Maturity : Available on request
Portability :
Type :
 Hard IP 
Foundry :
TSMC
Nodes :
7nm
10nm
12nm
16nm
22nm
28nm
40nm
Process :
ULP, ULPeF, HPCP, HPC, HPM, FFPGL, FFPLL, FFC, FF




© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise