Part Number : dwc_d2d_ctrl_ip
Short Desc. : Die-to-Die Controller IP
Overview :

The DesignWare Die-to-Die Controller IP, optimized for latency, bandwidth, power and area, enables efficient inter-die connectivity in server, AI accelerator, networking and high-performance computing SoCs. The controller interoperates with the DesignWare 112G USR/XSR PHY to deliver a complete Die-to-Die solution for a seamless connection between the on-die interconnect fabrics in both dies via the standard AXI or CXS ports. The DesignWare Die-to-Die Controller uses a FLIT-based architecture to minimize latency. It implements an advanced error detection and correction mechanism including Cyclic Redundancy Check (CRC) and optional latency-optimized Forward Error Correction (FEC) to reduce Bit Error Rate (BER) to a very low level for PAM-4 or NRZ PHY signaling. The embedded retry protocol enables very low latency, error free links between two dies.

The DesignWare Die-to-Die Controller optimizes system performance by supporting two configurations for coherent and non-coherent data traffic between the SoC bus and each die. The latency-optimized configuration interfaces with the SoC fabric via a FLIT-based interface (Arm® CXS) and the generic configuration leverages the Arm 4 AXI interface. The DesignWare Dieto-Die Controller can be extended to support any aggregate bandwidth between the two dies using bifurcation into multiple parallel links.

Features : - Low Latency controller for die-to-die connectivity
- Supports PAM-4 and NRZ PHY signaling mode in all data rates
- Reduces BER with optional FEC configurations
- Supports optional Arm® AMBA® AXI™ and CXS interfaces
- Supports coherent CXL/CCIX and noncoherent data traffic over die-to-die links
- Enables complete NoC-to-NoC interface between two dies
Categories :
Maturity : Available On Request
Portability :
Type : Soft

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise