Login

 VeriSilicon Holdings Co., Ltd. 
Part Number : S13_USB20PHY_01
Overview :
The USB 2.0 PHY is a Hi-Speed USB peripheral transceiver IP that implements the Intel?UTMI standard. It provides a High/Full-Speed USB analog front-end with a build-in 8-bit/16-bit parallel interface, therefore, easy to interface with USB2.0 Device System.
Features : - USB-IF Proven.
- Compliant with USB Spec Rev2.0
- Compliant with UTMI Spec Rev1.05
- Support 480Mbit/s 揌igh Speed?and 12Mbit/s 揊ull Speed?
- Support 60MHz/8-bit unidirectional interface and 30MHz/16-bit bidirectional interface.
- 12MHz external crystal, internal oscillator and PLL are used to generate high-speed internal clock and CLKOUT output.
- Internal terminations include 1.5Kohm pull-up resistor switching on DP/DM in the FS state and the HS chirp state.
- Clock and data recovery from serial stream on the USB bus.
- Support detection of USB reset, suspend, resume and remote-wake-up features.
- Support test modes defined in USB2.0 Specification.
- NRZI and Bit Stuff encoding and decoding.
Categories :
Portability :
Type : Hard
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise