A town planner works out the number, types, and sizes of buildings in a development project. An architect designs each building, including the arrangement of the rooms in each building. Then a builder carries out the construction according to the architect’s drawings. Electrical wiring is one of the last steps in the construction of each building. The physical design of ASICs is normally divided into system partitioning, floorplanning, placement, and routing. A microelectronic system is the town and the ASICs are the buildings. System partitioning corresponds to town planning, ASIC floorplanning is the architect’s job, placement is done by the builder, and the routing is done by the electrician. We shall design most, but not all, ASICs using these design steps.

15.1 Physical Design

15.2 CAD Tools

15.3 System Partitioning

15.4 Estimating ASIC Size

15.5 Power Dissipation

15.6 FPGA Partitioning

15.7 Partitioning Methods

15.8 Summary

15.9 Problems

15.10 Bibliography

15.11 References

Chapter  Index ] [ Next page ]

Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise