Legend's MSIM supports BSIM4.3.0 model for nanometer designs

SANTA CLARA, Calif., -- February 12, 2004 - Legend Design Technology, Inc. today announced the MSIM circuit simulator provides full modeling support of BSIM4.3.0 for nanometer process technology. MSIM is a high-accuracy circuit simulator with post-layout RC reduction capability.

Legend's MSIM with new BSIM4.3.0 model has been successfully used for simulating state-of-the-art 90 nm CMOS memory designs by major foundry customers. It has been observed that the MSIM simulation results show there is approximately a 3 % difference when considering stress effects (SA, SB) while measuring rise and fall times.

For BSIM4.3.0 support, MSIM has been built to handle the additional electrical mechanisms, model parameters and equations associated with the new model. This includes:

1. A new scalable stress effect model for process induced stress - where device performance becomes a function of the active area geometry and the location of the device in the active area.
2. A unified current-saturation model that includes all mechanisms of current saturation, velocity saturation, velocity overshoot and source end velocity limit.
3. A new temperature model format that allows convenient prediction of temperature effects on saturation velocity, mobility, and S/D resistances.
4. Enhanced accuracy and flexibility of holistic thermal noise model.
5. Improved accuracy of forward body bias model, and
6. Extension of gate direct tunneling model to multiple-layer gate dielectrics.

"Device modeling in circuit simulators is essential for silicon success of deep-submicron and nanometer SOC designs. Based upon our clients' needs, Legend has successfully implemented the BSIM4.3.0 model in MSIM to offer an accurate and reliable simulation solution." said Dr. You-Pang Wei, president and chief executive officer of Legend Design Technology. "We are fully committed to provide robust circuit simulators that support the sophisticated and updated models associated with nanometer SOC designs."

About Legend Design Technology, Inc.
Legend Design Technology, Inc. is a leading provider of characterization and simulation software for semiconductor Intellectual Property (IP) in SoC designs. With an emphasis on productivity and value, Legend's CharFlo-Memory! tool set which includes MSL, SpiceCut and MemChar, revolutionizes the time consuming and error prone processes associated with characterization. SpiceCut can automatically build critical-path circuits to reduce simulation time for characterization, especially from post-layout extracted circuits with resistors and capacitors. MemChar can automatically characterize the memories and generate the 'true' timing and power models. MSL can automate memory characterization with customized setup of '.Lib-in and .Lib out'.

MSIM is a high-accuracy circuit simulator with post-layout RC reduction capability. With high accuracy, high speed and licensing models, MSIM can provide excellent price-performance. Turbo-MSIM is a high-speed and high-capacity circuit simulator. With scalable speed, capacity and accuracy, Turbo-MSIM is ideal for timing and power simulation, function verification and circuit analysis for SoC designs under deep-submicron and nanometer technology.

For more information, visit www.LegendDesign.com




Review Article Be the first to review this article
Aldec


Latest Blog Posts
Michelle Mata-ReyesAldec Design and Verification
by Michelle Mata-Reyes
ARM-based SoC Co-Emulation using Zynq Boards
Jobs
Senior Account Managers… FORMAL VERIFICATION...VALLEY for EDA Careers at San Jose, California
Sr. Application Engineer for Mentor Graphics at Fremont, California
Salesforce Technical Lead   East Coast  for EDA Careers at Cherry Hill, New Jersey
Hardware Engineer, Board Design for Arista Networks at Santa Clara, California
Senior Software Architect Internet for EDA Careers at San Jose, California
Upcoming Events
FLEX 2020 and MSTC 2020 at DoubleTree by Hilton 2050 Gateway Place San Jose CA - Feb 24 - 27, 2020
DVCon U.S. 2020 at DoubleTree Hotel San Jose CA - Mar 2 - 5, 2020
OFC 2020 - The Optical Networking and Communication Conference & Exhibition at San Diego Convention Center San Diego CA - Mar 8 - 12, 2020
DATE '2020 at ALPEXPO Grenoble France - Mar 9 - 13, 2020



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise