Kilopass Embedded Non Volatile Memory IP Has Passed Rigorous JEDEC Qualification on GLOBALFOUNDRIES 40nm LP Process in Time for Customer Production

The Qualification of Kilopass Product Line Signals Mainstream Adoption of 40nm In Digital Entertainment At GLOBALFOUNDRIES

Santa Clara, Calif.  – October 29, 2013 – Kilopass Technology Inc., a leading provider of logic embedded non-volatile memory (eNVM) intellectual property (IP) and a GLOBALSOLUTIONS Partner, today announced that its entire product line of anti fuse one-time programmable (OTP) eNVM has completed 1000 hours of JEDEC standard reliability testing for GLOBALFOUNDRIES’ 40nm low power process technology.  Kilopass’ eNVM product line offers up to 2Mb of storage capacity and is ready for immediate customer production.  Two customers are in final preparation for production on GLOBALFOUNDRIES’ 40nm LP process.

“As 40nm enters mainstream adoption, we work hard with all our IP partners to make sure the ecosystem delivers high-yield, high-quality mass production,” said Dan Weed, director, design solutions at GLOBALFOUNDRIES.  “We appreciate Kilopass’ diligence and expertise to complete the rigorous qualification according to JEDEC standard for non-volatile memory.”

Kilopass’ JEDEC qualified antifuse technology makes it an ideal choice for mainstream system-on-chip (SoC) design teams developing SoCs for digital entertainment and consumer electronics at GLOBALFOUNDRIES.  Implemented in standard logic CMOS without requiring any additional backend process steps, Kilopass eNVM IP provides up to 2Mb of highly secure storage capacity with 10 years or more of reliable read operation in environmental extremes from -40 to 125°C. Kilopass supports in-system programming without process or mask modifications, thus enabling low manufacturing costs.

“We are pleased to have completed JEDEC qualification on GLOBALFOUNDIRES 40nm LP process just in time to meet the mass production requirements of two of our mutual customers and significant interests from several other Kilopass licensees,” said Kilopass VP of R&D, Harry Luan.  “We are impressed with the GLOBALFOUNDRIES advanced process node roadmap and we are continuing our enablement efforts with them to serve our mutual customers.”

About JEDEC 3-Lot Qual

Because semiconductor designs are expected to work in extreme conditions from -40C to 120C (from Alaska in winter to the inside of a car in Phoenix in the summer) for 10 years or more of life, each new SoC design must be tested to ensure it meets this requirement. JEDEC (Joint Electron Device Engineering Council), a developer of open standards for the microelectronics industry, established an accelerated testing methodology to simulate 10 years of operating life in these extreme conditions. It requires representative samples composed of approximately equal numbers from at least three (3) nonconsecutive lots of silicon chips. The lots are tested for correct operation while being subjected to alternating period of extreme heat and cold.


Kilopass XPM and Gusto NVM IP are currently available for licensing on GLOBALFOUNDRIES 40nm LP process.  Contact  Email Contact for more information. Kilopass will exhibit at ARM® TechCon 2013 in Booth #806 and demonstrate its OTP eNVM Wednesday and Thursday, October 30-31, at the Santa Clara Convention Center, Santa Clara, Calif.

About Kilopass

Kilopass Technology, Inc., a leading supplier of embedded NVM intellectual property, leverages standard logic CMOS processes to deliver one-time programmable (OTP) and many-time programmable (MTP) memory. With 58 patents granted or pending and more than 800,000 wafers shipped from a dozen foundries and Integrated Device Manufacturers (IDMs), Kilopass has more than 150 customers in applications ranging from storage of firmware and security codes to calibration data and other application-critical information. The company is headquartered in Santa Clara, Calif.  For more information, visit or email  Email Contact.

Review Article Be the first to review this article
Featured Video
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
ESD Alliance/Accellera Panel Takes Executive View on Returning to the Office
Vincent ThibautArteris IP Blog
by Vincent Thibaut
Arteris IP Extends IP-XACT to UVM Testbenches
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Specification Automation for Designers
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
NAND Hardware Engineer for Apple Inc at Cupertino, California
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Design Verification Engineer II for Synopsys, Inc. at Mountain View, California
Upcoming Events
DesignCon 2021 at San Jose McEnery Convention Center San Jose, CA San Jose CA - Aug 16 - 18, 2021
SEMICON Southeast Asia 2021 Hybrid Event at Setia SPICE Convention Centre Penang Malaysia - Aug 23 - 27, 2021
SEMI Europe Summit at Online, Central European Time Germany Germany - Sep 1 - 3, 2021
7th International Conference on Sensors & Electronic Instrumentation Advances (SEIA' 2021) at Palma de Mallorca, Mallorca balearic islands) Spain - Sep 14 - 16, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise