Silego Technology Introduces a 28 mΩ, Ultra-Low Quiescent Current P-Channel GreenFET3™ Load Switch

SANTA CLARA, Calif. — (BUSINESS WIRE) — March 24, 2014 — Silego Technology introduces the SLG59M1557, a 28 mΩ P-Channel, ultra-low quiescent current GreenFET3 load switch. The product is based on Silego’s proprietary sub-micron CuFET technology. The device can achieve 0.1uA typical and 1uA maximum quiescent current in both ON and OFF states. This device has an integrated level shift function for the ON pin, which allows the system MCU to directly turn on or off the load switch without any discrete logic or level shifting components.

Innovative GreenFET3 (TM) Load Switch at only 1.0x1.0 mm (Photo: Business Wire)

Innovative GreenFET3 (TM) Load Switch at only 1.0x1.0 mm (Photo: Business Wire)

“The low quiescent current performance and integrated level shift are ideal features for applications such as wearable electronics and ultra-low power portable electronics. These devices can achieve world class power reduction and board space savings,” said Director of Marketing, Jay Li “and comparing to existing products on the market that only operate up to 3.6 V, the SLG59M1557V’s wide voltage range (1.5 V to 5.5 V) covers the entire single cell lithium-ion battery voltage range”.

The first version of this product is introduced in the STDFN package (1.0x1.0x0.55 mm). The STDFN package offers superb mechanical protection. The package can be directly soldered on the PCB or flexible cable without using any PCB under-fill. The STDFN package has a significantly higher mechanical stress tolerance than a WLCSP packaging, both during manufacturing and end use. This is particularly valuable for wearable electronics which may be frequently dropped by users.

The 59M1557 is also available in Silego’s proprietary Lo-ZTM ETDFN package technology, which can reduce the STDFN package max height from 0.50 mm down to 0.3 mm. Please contact Silego for more information.

SLG59M1557V Features:

  • 1.0x1.0 mm package
  • VD: 1.5 V to 5.5 V
  • IDD: 0.1uA typical
  • Integrated level shift and VIL control
  • Integrated discharge resistor

Target Applications:

  • Wearable electronics
  • Smartphones and tablets
  • Power rail switching for ultra-low power budget systems
  • Extreme space constrained and flexible circuits

For pricing, samples, datasheets and technical information about Silego’s load switches please contact our four hour guaranteed response customer service team at: info@silego.com or visit our website: http://www.silego.com

About Silego – The CMIC Company

Silego Technology, the CMIC Company, designs and sells highly configurable power, logic, and timing mixed signal IC products referred to as CMICs (Configurable Mixed-signal IC Products). CMIC products integrate analog components, discrete digital logic, and passive components into highly configurable small, easy to use, low cost ICs. CMIC products provide customers the benefits of reduced component count, lower power consumption, less board space and reduced BOM costs. Silego CMICs provide the speed and flexibility of an FPGA, with programmable analog and digital elements.



Contact:

Silego Technology
Victoria Yatskulyak, 408-327-8800
Silego WW MarCom Manager
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Breaking Down Chip Design Functional Verification with Breker’s Adnan Hamid
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Welcome Back to DAC – in Person – in San Francisco
Vincent ThibautArteris IP Blog
by Vincent Thibaut
Why Automate Traceability?
Jobs
Technical Product Manager- SISW-EDA 238452 for Siemens AG at Fremont, California
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
Circuit Design & Layout Simulation Engineer - Co-Op (Spring 2021) for Global Foundaries at Santa Clara, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Business Operations Planner for Global Foundaries at Santa Clara, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Upcoming Events
RISC-V Summit 2021 - Virtually or in-person at Moscone Center West Hall 747 Howard St San Francisco CA - Dec 6 - 8, 2021
Where is the Functional Safety Standard and Why Adopt It? at Design Automation Conference Moscone West, Room 3001 San Francisco CA - Dec 6, 2021
Semicon West Hybrid 2021 at Moscone North and South San Francisco, CA - Dec 7 - 9, 2021
67th Annual IEEE International Electron Devices Meeting at Hilton San Francisco Union Square hotel San Francisco - Dec 11 - 15, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise