I2C functional tests on prototypes without operating software accelerates design validation

Sep 10, 2014 -- A new eBook explains how the circuit board design validation process can be accelerated by performing at-speed functional tests on the Inter-Integrated Circuit (I2C) bus interfaces on prototype boards before their operating software is available. The test strategy involves temporarily inserting embedded instrumentation intellectual property into an on-board field programmable gate array (FPGA) and applying boundary-scan or JTAG tests to verify structural integrity.

Published by ASSET InterTech ( www.asset-intertech.com), the eBook describes several methodologies whereby the I2C interfaces on non-booting prototypes or fully assembled boards can be tested and validated. In the case of prototype boards, the design team would not have to wait for operating firmware before validating the functionality of I2C. In other words, functional hardware verification is decoupled from functional software development. In addition, the time spent on developing traditional functional tests is avoided as well. On assembled boards that fail to boot, these same methods could eliminate faults in the board’s I2C interfaces as a root cause of the failure.

“Developing and performing a functional test suite for a new circuit board design can be a very laborious and time consuming task,” said Kent Zetterberg, an ASSET product manager and author of the new eBook. “A test strategy based on embedded instruments not only saves time and money, but it also provides a lot more diagnostic information on the root causes of faults and failures than a traditional functional test ever could.”

Titled “I2C Functional Test with JTAG and FPGA IP,” the new eBook is available now on the ASSET website in its eResources center at http://www.asset-intertech.com/Products/Boundary-Scan-Test/BST-Software/I2C-Functional-Test-1149-1-JTAG-and-FPGA-IP

Other informative eBooks, white papers and videos on issues relating to chip, board and system debug, validation and test also can be downloaded from: http://www.asset-intertech.com/eResources

About ASSET InterTech

ASSET InterTech is a leading supplier to the electronics industry of tools based on embedded instrumentation. Its SourcePoint debugger and the ScanWorks platform for embedded instruments overcome the limitations of external test and measurement equipment by applying instrumentation embedded in code and semiconductors to debug and validate software and firmware, and to perform design validation and manufacturing test on chips and circuit boards. ASSET InterTech is located at 2201 North Central Expressway, Suite 105, Richardson, TX 75080.

Follow us on:

Facebook:        https://www.facebook.com/ASSETInterTech

LinkedIn:        http://www.linkedin.com/company/asset-intertech-inc.

Twitter:           https://twitter.com/ASSETInterTech

YouTube:        http://www.youtube.com/ASSETInterTech

Blog:               http://blog.asset-intertech.com/

 

  



Read the complete story ...


Review Article Be the first to review this article
Aldec

 True Circuits: Ultra PLL

Featured Video
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Automation of the UVM Register Abstraction Layer
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Virtual 2020 CEO Outlook Set for June 17
Colin WallsEmbedded Software
by Colin Walls
Multiple constructors in C++
Jobs
Software Engineer for EDA Careers at RTP, North Carolina
Senior Application Engineer Formal Verification for EDA Careers at San Jose and Austin, California
Senior Layout Engineer for EDA Careers at EAST COAST, California
Senior Analog Design Engineers #5337 for EDA Careers at EAST COAST, California
Upcoming Events
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020
IEEE Computer Society Annual Symposium on VLSI (ISVLSI) 2020 at Limassol Hotel, Amathus Area, Pareklisia Cyprus - Jul 6 - 8, 2020
57th Design Automation Conference 2020 at San Francisco CA - Jul 19 - 23, 2020



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise