New LinkSwitch-4 Switcher ICs from Power Integrations Pass US DoE-6 and European CoC Efficiency Rules

Adaptive base and emitter switched drive technology enables safe use of low-cost bipolar junction transistor switches

SAN JOSE, Calif. — (BUSINESS WIRE) — January 28, 2015 — Power Integrations (Nasdaq: POWI), the leader in high-voltage integrated circuits for energy-efficient power conversion, today announced the LinkSwitch™-4 family of CV/CC primary-side regulated (PSR) switcher ICs. The LinkSwitch-4 product family features an advanced adaptive base and emitter switched drive scheme for bipolar junction transistor switches (BJTs) that substantially improves power conversion efficiency and eliminates reliability concerns due to secondary breakdown. The new family of devices targets chargers and adapters required to meet stringent new efficiency rules from the US Department of Energy (DoE) and European Code of Conduct (CoC), both of which are scheduled to come into force in January 2016. The new DoE rules, known as DoE-6, require efficiency compliance measurements to be taken at the end of the charger USB cable; LinkSwitch-4 exceeds the requirements while using a low-complexity Schottky diode secondary, even for high-current 1.5 A and 2 A smartphone chargers.

LinkSwitch-4 ICs incorporate a multimode PWM/PFM controller with a quasi-resonant switching strategy to maximize the efficiency, meet <30 mW no-load and at the same time maintain fast transient response. A high operating frequency of up to 65 kHz enables transformer size to be minimized, and the minimum peak current is fixed to improve transient load response. Devices compensate for a number of factors including: transformer inductance tolerances; input line voltage variations; cable voltage drop; and external component temperature variations. Very accurate IC parameter tolerances are maintained using proprietary trimming technology.

Comments Mike Matthews, Power Integrations’ vice president of product development: “The LinkSwitch-4 controller’s adaptive base and emitter switched drive scheme boosts switching performance and delivers higher efficiency than is possible using existing BJT or MOSFET switchers. The technique also eliminates secondary breakdown associated with BJTs and reduces sensitivity to variation in current gain, allowing use of very low cost BJTs. The adaptive base-emitter switched drive technology not only provides design and manufacturing flexibility in the choice of BJT transistors by dynamically optimizing BJT switching characteristics but also dramatically improves the reliability of BJTs based solutions.”

Suitable for chargers for cell/cordless phones, PDAs, MP3 and other portable audio devices, adapters, and more, LinkSwitch-4 ICs are available in SOT-23-6 and SO-8 packages. Devices cost $0.16 to $0.25 in 10,000-piece quantities. The datasheet can be downloaded now from Power Integrations’ website at http://ac-dc.power.com/products/linkswitch-family/linkswitch-4.

About Power Integrations

Power Integrations, Inc. is a leading innovator in semiconductor technologies for high-voltage power conversion. The company’s products are key building blocks in the clean-power ecosystem, enabling the generation of renewable energy as well as the efficient transmission and consumption of power in applications ranging from milliwatts to megawatts. For more information please visit www.power.com.

Power Integrations, LinkSwitch and the Power Integrations logo are trademarks or registered trademarks of Power Integrations, Inc. All other trademarks are the property of their respective owner.



Contact:

Media Contact
Power Integrations, Inc.
Peter Rogerson, 408-414-8573
Email Contact
or
Press Agency Contact
BWW Communications
Nick Foot, +44 (0) 1491-636 393
Email Contact




Review Article Be the first to review this article
Featured Video
Editorial
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Breaking Down Chip Design Functional Verification with Breker’s Adnan Hamid
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Welcome Back to DAC – in Person – in San Francisco
Vincent ThibautArteris IP Blog
by Vincent Thibaut
Why Automate Traceability?
Jobs
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
Technical Product Manager- SISW-EDA 238452 for Siemens AG at Fremont, California
Business Operations Planner for Global Foundaries at Santa Clara, California
Circuit Design & Layout Simulation Engineer - Co-Op (Spring 2021) for Global Foundaries at Santa Clara, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
NAND Hardware Engineer for Apple Inc at Cupertino, California
Upcoming Events
RISC-V Summit 2021 - Virtually or in-person at Moscone Center West Hall 747 Howard St San Francisco CA - Dec 6 - 8, 2021
Where is the Functional Safety Standard and Why Adopt It? at Design Automation Conference Moscone West, Room 3001 San Francisco CA - Dec 6, 2021
Semicon West Hybrid 2021 at Moscone North and South San Francisco, CA - Dec 7 - 9, 2021
67th Annual IEEE International Electron Devices Meeting at Hilton San Francisco Union Square hotel San Francisco - Dec 11 - 15, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise