PRINTR - Creating a Productive and Painless 3D Printing Experience with FORMIDEOS

Jul 15, 2015 -- PRINTR, a Dutch startup based in Amsterdam and Enschede, is changing the 3D printing landscape with FORMIDEOS. It was developed to create a streamlined 3D printing experience. It’s no secret that the 3D printing experience today revolves around reliable hardware as well as software. A clogged nozzle can ruin in the entire experience even if the software is perfect and vice versa. To fill that need, PRINTR created the hardware and software (side-by-side with the industry’s most promising 3D printer manufacturers) needed to create a productive and painless 3D printing experience. When you purchase a 3D printer integrated with FORMIDEOS, the user can start printing right away. It redefines the meaning of plug-n-print.

“We initially wanted to raise funds through a crowdfunding campaign, but we weren’t able to raise the set goal. However, when we opened the pre-order system and saw the overwhelming response, we knew we wanted to be able to get the best possible product to our supporters. This industry is volatile, so we took a look at what was already available, reviewed other ecosystems, and decided to raise the bar. We wanted to hold back our release until we knew our product was ready.” - Douwe Mulder, CEO

FORMIDEOS is the operating system that changes how the industry uses 3D printers. This OS includes easy printer setup, an interactive printer console, and full-support for multiple printers. There is also an extensive list of settings for countless customization possibilities within the included slicer, Katana, as well as various settings for the materials available to the user.

“We take care of the whole process that is involved in 3D printing bringing it back to the single print button. We believe it should be just as easy to print a 3D model as it is to print a Word document.” - Douwe Mulder, CEO

Currently, parts of FORMIDEOS are open-source and are ready to be customized, built upon, and tinkered with. Though, FORMIDEOS is currently in beta, it does include the ability to create 3rd party modules.

Sections that are open-source:

  • The client, a node.js program that ties together the slicer, drivers, cloud and local interface.

  • The interface, a mainly AngularJS front-end that allows you to control your 3D printer over a local network.

  • The development kit, which is already on GitHub (

Created with Dutch ingenuity and manufactured in the Netherlands, The Element is a complimentary piece of hardware to FORMIDEOS. This gives 3D printers features such as wifi capability, over-the-air updates, remote monitoring and control, all with a plug and play set-up. For the aftermarket consumer, it will be a mineral-shaped piece of hardware that plugs directly into the 3D printer. Those who pre-ordered will receive their Element by the beginning of September.

FORMIDEOS beta is available for a test drive on a raspberry pi. Registration is now open on to get started. To learn more about the beta version of FORMIDEOS, see our development website. To follow our development process, visit our dev blog at

PRINTR is a Dutch startup company created to streamline the 3D printing experience. As a spin-off from the University of Twente, PRINTR was established in Enschede in 2014 and has now expanded to offices in Amsterdam and Enschede.

Links included

Press Contact:
Jessica Cutrufello
Email Contact

Read the complete story ...

Review Article Be the first to review this article

Featured Video
Roberto FrazzoliEDACafe Editorial
by Roberto Frazzoli
Special Report: Machine Learning in EDA
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Remembering Jim Hogan
Colin WallsEmbedded Software
by Colin Walls
Variable declarations in C – plenty of pitfalls
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
AUGER: Celebrating Our Users
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Staff SerDes Applications Design Engineer for Xilinx at San Jose, California
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Senior Staff Field Application Engineer for Global Foundaries at Santa Clara, California
Upcoming Events
IPC APEX EXPO 2021 Goes Virtual at - Mar 8 - 12, 2021
ADAS Sensors 2021 at The Henry Hotel 300 Town Center Drive Dearborn MI - Apr 7 - 8, 2021
ISQED'21 - 22nd International Symposium at POB 607 Los Altos CA - Apr 7 - 9, 2021
SEMI MEMS & Sensors Industry Group (MSIG), MSTC 2021 at United States - Apr 13 - 15, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise