EDA Consortium Reports EDA Industry Revenue Increase For Q2 2015

SAN JOSE, Calif., Sept. 28, 2015 — (PRNewswire) — The EDA Consortium (EDAC) Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 8.5 percent for Q2 2015 to $1906.5 million, compared to $1757.9 million in Q2 2014. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, also increased by 8.5 percent.

"The EDA Industry continues to show solid revenue growth in the second quarter, with double digit growth in semiconductor IP and services," said Walden C. Rhines, board sponsor for the EDAC MSS and chairman and CEO of Mentor Graphics. "CAE and IC physical design also reported solid growth. Geographically, all regions except Japan saw revenue increases, especially Asia/Pacific."

Companies that were tracked employed a record 32,806 professionals in Q2 2015, an increase of 4.9 percent compared to the 31,259 people employed in Q2 2014, and up 2.1 percent compared to Q1 2015.

The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members of the EDA Consortium.

Revenue by Product Category
The largest category, Computer Aided Engineering (CAE), generated revenue of $657.2 million in Q2 2015, which represents a 9.6 percent increase compared to Q2 2014. The four-quarters moving average for CAE decreased 0.3 percent.

IC Physical Design & Verification revenue was $379.2 million in Q2 2015, a 6 percent increase compared to Q2 2014. The four-quarters moving average increased 10 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $155.3 million for Q2 2015 represents a decrease of 13 percent compared to Q2 2014. The four-quarters moving average for PCB & MCM decreased 3.1 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $611.7 million in Q2 2015, a 15 percent increase compared to Q2 2014. The four-quarters moving average increased 22.1 percent.

Services revenue was $103.1 million in Q2 2015, an increase of 14.7 percent compared to Q2 2014. The four-quarters moving average increased 11.5 percent.

Revenue by Region
The Americas, EDA's largest region, purchased $870.3 million of EDA products and services in Q2 2015, an increase of 9.5 percent compared to Q2 2014. The four-quarters moving average for the Americas increased 11.2 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) increased 5.2 percent in Q2 2015 compared to Q2 2014 on revenues of $305.4 million. The EMEA four-quarters moving average increased 0.7 percent.

Second quarter 2015 revenue from Japan decreased 3.4 percent to $182.8 million compared to Q2 2014. The four-quarters moving average for Japan decreased 10.4 percent.

The Asia/Pacific (APAC) region revenue increased to $548.1 million in Q2 2015, an increase of 13.2 percent compared to the second quarter of 2014. The four-quarters moving average increased 17.6 percent.

The complete MSS report, available to the EDA Consortium members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report
The EDA Consortium Market Statistics Service reports EDA industry revenue data quarterly and is available to EDAC members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the EDA Consortium
The Electronic Design Automation Consortium, EDAC, is the international association representing companies that develop and provide software tools, services, intellectual property and hardware that make it possible for hardware and software engineers to create the world's electronic products. EDAC's member companies deliver the critical technology and solutions needed to design and verify the semiconductors and associated software, packaging and interconnect technologies that enable the manufacturing of these products. Our member companies impact every conceivable segment of the electronics market, from communications, computers, networking, space technology, medical and industrial equipment to consumer electronics and the emerging IoT (Internet of Things) markets. For more information about the EDA Consortium, visit www.edac.org, or to join EDAC and receive the quarterly Market Statistics Service report, call 408-287-3322 or email Email Contact.

The information supplied by the EDA Consortium is believed to be accurate and reliable, but the EDA Consortium assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:    
Paul Cohen, EDA Consortium, 978-769-2106    
Suzanne Graham, Mentor Graphics, 503-685-7789 

 

To view the original version on PR Newswire, visit: http://www.prnewswire.com/news-releases/eda-consortium-reports-eda-industry-revenue-increase-for-q2-2015-300149388.html

SOURCE EDA Consortium

Contact:
EDA Consortium
Web: http://www.edac.org




Review Article Be the first to review this article
Aldec

 True Circuits: Ultra PLL

Featured Video
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Automation of the UVM Register Abstraction Layer
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Virtual 2020 CEO Outlook Set for June 17
Colin WallsEmbedded Software
by Colin Walls
Multiple constructors in C++
Jobs
Senior Analog Design Engineers #5337 for EDA Careers at EAST COAST, California
Senior Application Engineer Formal Verification for EDA Careers at San Jose and Austin, California
Software Engineer for EDA Careers at RTP, North Carolina
Senior Layout Engineer for EDA Careers at EAST COAST, California
Upcoming Events
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020
IEEE Computer Society Annual Symposium on VLSI (ISVLSI) 2020 at Limassol Hotel, Amathus Area, Pareklisia Cyprus - Jul 6 - 8, 2020
57th Design Automation Conference 2020 at San Francisco CA - Jul 19 - 23, 2020
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise