Media Alert: Cadence to Showcase ARM-Optimized Solutions for Developing Complete Systems at ARM TechCon 2015

SAN JOSE, Calif., Nov. 3, 2015 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS) today announced it plans to showcase its ARM®-optimized solutions that make complete systems possible at ARM TechCon 2015. The event is scheduled for November 10-12, 2015, in Santa Clara, Calif., with Cadence, a diamond sponsor, in booth #200.

Cadence Logo


Cadence is scheduled to deliver several presentations developed for the ARM community. The scheduled Cadence® speaking sessions are:

  • Case Study: Optimizing GPU Performance Through Matched DDR Subsystem Design: Tuesday, Nov. 10, 11:30am, Nick Heaton, Cadence distinguished engineer, and Mladen Wilder, ARM senior principal engineer
  • Miniaturizing Sensing and Power for IoT Design: Wednesday, Nov. 11, 10:30am, Ian Dennison, Cadence senior group director, R&D, and Tim Menasveta, ARM CPU product manager
  • Multi-Abstraction Hardware/Software Debug for ARMv7/8-Based SoCs: Wednesday, Nov. 11, 11:30am, Frank Schirrmeister, Cadence group director, product management, Larry Melling, Cadence product management director, and Robert Kaye, ARM technical specialist
  • High-Performance Implementation of ARM Cortex®-M7 Processor in Embedded Flash Technology, Wednesday, Nov. 11, 11:30am, Emmanuelle Amouriaux, Cadence staff applications engineer, and Alain Sermesse, Atmel physical design manager
  • Reducing Margin Pessimism in ARM IP with LVF and Statistical On-Chip Variation: Wednesday, Nov. 11, 2:30pm, Igor Keller, Cadence distinguished engineer, and Jim Dodrill, ARM senior principal engineer
  • Validating the Performance Envelope of Configurable Cache-Coherent Systems: Wednesday, Nov. 11, 3:30pm, Nick Heaton, Cadence distinguished engineer and Jeff Defilippi, ARM product manager
  • New Verification Requirements for ARM AMBA® AHB-Based IoT Systems on Chip (SoCs): Wednesday, Nov. 11, 4:30pm, Avi Behar, Cadence product marketing director, Verification IP, and William Orme, ARM product manager
  • Achieving Perfect Power/Performance/Area/Thermal Balance for Apps Processor Cores in FinFET Nodes: Thursday, Nov. 12, 10:30am, Sumit Goswami, Qualcomm engineering director
  • Practical ARM CPU Digital Implementation on TSMC 10nm: Thursday, Nov. 12, 11:30am, Paddy Mamtora, Cadence product engineering group director, and Tim Whitfield, ARM director of engineering
  • Portable and Reusable System-Level Verification Use Cases for ARM-Based SoCs: Thursday, Nov. 12, 11:30am, Larry Melling, Cadence product management director, and,   Swami Venkatesan, solutions architect
  • Implementation of ARM Cortex-A17 Quad-core in GLOBALFOUNDRIES 22FDX Technology: Thursday, Nov. 12, 2:30pm, Dr. Joerg Winkler, GLOBALFOUNDRIES fellow design engineer, and Dr. Tamer Ragheb, GLOBALFOUNDRIES digital design methodology manager
  • Architecting and Customizing SoC Infrastructure for Optimum Mobile SoC Performance: Thursday, Nov. 12, 2:30pm, Nick Heaton, Cadence distinguished engineer, and William Orme, ARM strategic marketing manager, Interconnect Products
  • Enabling Power Closure and Power Analysis for ARM Systems: Thursday, Nov. 12, 4:30pm, John Decker, Cadence low-power solutions architect

New this year is the Cadence "Expert Bar" in booth #200, where attendees can hold in-depth discussions on a variety of design challenge topics with Cadence experts. Throughout the two exhibit days, experts will be available on topics such as IoT design, verifying AMBA protocol compliance, embedded software debug and digital implementation of ARM IP. To see the full schedule, visit the Cadence events website at

To register for the conference, visit


ARM TechCon is scheduled for November 10-12, 2015.


Santa Clara Convention Center in Santa Clara, Calif.

Cadence is located in booth #200.

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers and research facilities around the world to serve the global electronics industry. More information about the company, its products and its services is available at

© 2015 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence and the Cadence logo are registered trademarks of Cadence Design Systems, Inc. in the United States and other countries. ARM, AMBA, and Cortex are registered trademarks of ARM Limited (or its subsidiaries) in the EU and/or elsewhere. All other trademarks are the property of their respective owners.

For more information, please contact:

Cadence Newsroom

Logo -


To view the original version on PR Newswire, visit:

SOURCE Cadence Design Systems, Inc.

Cadence Design Systems, Inc.

Review Article Be the first to review this article

Try our TCB Experts

Featured Video
Senior and (less) Senior Design Verification Engineers for EDA Careers at San Jose and Austin, California
Senior Analog Design Engineers #5337 for EDA Careers at EAST COAST, California
Senior Account Managers… FORMAL VERIFICATION...VALLEY for EDA Careers at San Jose, California
Senior Layout Engineer for EDA Careers at EAST COAST, California
Upcoming Events
Linley Spring Processor Conference - NOW A VIRTUAL EVENT at Virtual Event CA - Apr 6 - 9, 2020
Embedded Vision Summit 2020 at Santa Clara Convention Center Santa Clara CA - May 18 - 21, 2020
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020
DownStream: Solutions for Post Processing PCB Designs
Verific: SystemVerilog & VHDL Parsers

© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise