Microsemi Announces Aerospace Power Core Module With Integrated FPGA and Hybrid Power Drive Stage

Airbus Utilizing Company's Development of Intelligent Power Solutions to Optimize Power Electronics on "More Electric Aircraft"

ALISO VIEJO, Calif., Oct. 25, 2016 — (PRNewswire) —  Microsemi Corporation (Nasdaq: MSCC), a leading provider of semiconductor solutions differentiated by power, security, reliability and performance, today announced its aerospace power core module (PCM) with an integrated field programmable gate array (FPGA) and hybrid power drive (HPD) stage. The PCM controls the electrical motors used in applications such as primary flight control actuation, landing gear systems and other systems. The device interfaces seamlessly with both aircraft power supplies and flight controllers, providing vital sensor feedback for health monitoring.

Microsemi announced its aerospace power core module with an integrated field programmable gate array (FPGA) and hybrid power drive stage.

The move toward more electric aircraft (MEA) continues to drive demand for increased levels of reliability and integration in the area of power electronics. Microsemi's new intelligent power solutions™ play an important role in supporting this objective.

"We are building upon our design-in success on current day MEA platforms with innovative power module construction to develop a portfolio of intelligent power conversion systems. With our growing investment in system-level engineering support and design services, we serve as an extension of our customers' design teams as we develop solutions for aerospace applications that are optimized for power density, performance, cost and reliability," said Siobhan Dolan Clancy, vice president and general manager of Microsemi's Discrete Products Group. "Our aerospace PCM leverages our extensive expertise in IGBTs, SiC MOSFETs, diodes, FPGAs and power modules, bringing together the most advanced capabilities from our worldwide development team and Aviation Center of Excellence."

According to global market research and consulting company MarketsandMarkets, the actuator, electrical and electronics systems market was valued at $8 billion in 2013 and is expected to grow at a compound annual growth rate (CAGR) of 14 percent to reach $21 billion by 2020. The electrical systems are expected to grow at a CAGR of 16 percent while the electronics components market is estimated to grow at a CAGR of 13 percent. Microsemi's product development is aligned with these growth trends as the company continues to innovate intelligent power solutions for a variety of these applications.

Microsemi's new PCM is a highly integrated, flexible and scalable power solution for actuation and power conversion applications, including landing systems, de-icing systems, wheels and braking systems, high lift, and primary and secondary flight control actuation systems. Customization options are also available to ensure a flexible product offering for customers. The PCM developed in partnership with Airbus, for example, has been designed for harsh environments and has undergone a comprehensive application-specific qualification and reliability program.

"As an aircraft designer, Airbus is constantly concerned with improvements in safety and performance through the adoption of new technologies such as flight control surfaces with electric actuators, forward facing crew cockpits and control systems with side sticks," said Alain Sagansan, Airbus research project leader. "Research studies on future architectures show the increased integration of standard modules with resulting logistical benefits. This paves the way for the adoption of new technologies as we move toward MEA solutions."

The Airbus design by Microsemi accommodates a wide range of voltages, including the emerging 540 volt supply rail being introduced on the latest generation of commercial aircraft. The design process is structured on the DO-254 quality standard.

"The collaboration between Airbus and Microsemi aims to enhance the ever-important onboard electronic performance," said Michel Todeschi, Airbus senior expert. "The Microsemi team's technological mastery in semiconductors, power modules and control electronics enables us to propose these adapted and optimized solutions. The electric actuators with integrated PCMs provide solutions to increase equipment maturity and reliability while reducing the cost."

Key features of Microsemi's new aerospace PCM include:

  • Fully engineered solution with a high level of integration
  • Design optimized for power density, weight, cost and functionality
  • Excellent performance, efficiency and reliability
  • Customized options available, leveraging standard building blocks and reducing development time and cost
  • A range of power options, starting at 5 kVA
  • Various data communication bus options available
  • Extensive modeling, simulation and analysis support
  • Documentation package with qualification and reliability data
  • Long-term reliability program
  • Partial discharge validation
  • Evaluation kit available

Product Availability
Microsemi's aerospace PCM with the embedded HPD is available for sampling. Evaluation kits will be available to order in December. For more information, including datasheets and application notes, visit http://www.microsemi.com/applications/commercial-aviation or contact Email Contact.

Microsemi's Aviation Centre of Excellence
In February, Microsemi announced the opening of its Aviation Centre of Excellence in Ennis to support the design, development and manufacturing of its new product line of high reliability aviation IPS. The facility not only provides access to a portfolio of highly integrated, flexible and scalable solutions, but customers also have access to a full technical service provider as an extension of their design teams. The facility's new research and development laboratory is fully resourced with modeling, simulation, analysis and algorithm development capabilities providing accelerated product innovation. The state-of-the-art measuring equipment enables extensive product testing while a dedicated reliability laboratory facilitates product qualification and long-term application specific life testing. The Aviation Centre of Excellence enables the company to offer a complete solution for high reliability aviation intelligent power solutions from design to manufacturing.

Microsemi Giving Wings to Innovation in Aerospace Electronics
Microsemi offers an industry-leading range of high reliability products and solutions for flight critical avionics and power conversion applications addressing the evolving needs of the aviation industry. Microsemi provides best-in-class FPGA and system-on-chip (SoC) technology for low power and SEU immunity, broadest range of transient voltage suppression (TVS) solutions for lightning protection, high performance power discrete technology such as IGBTs, silicon carbide (SiC) MOSFETs, diodes and their ruggedized power modules, a comprehensive analog and mixed-signal integrated circuit (IC) capability including high temperature SiC transistor drivers and sensor interface ICs, Ethernet and networking technologies, radio frequency (RF) diodes, power transistors, MMICs, modules and subsystems, and advanced packaging services including high temperature (HT) Polymer packaging technology. Microsemi continues to expand its leadership through product innovation and is building a solution capability by leveraging its broad portfolio of products to develop a new portfolio of intelligent power solutions in its Aviation Centre of Excellence, which serves as a full technical provider from design to manufacturing. For more information on Microsemi's aviation products and technologies, visit http://www.microsemi.com/applications/commercial-aviation.

About Microsemi
Microsemi Corporation (Nasdaq: MSCC) offers a comprehensive portfolio of semiconductor and system solutions for aerospace & defense, communications, data center and industrial markets. Products include high-performance and radiation-hardened analog mixed-signal integrated circuits, FPGAs, SoCs and ASICs; power management products; timing and synchronization devices and precise time solutions, setting the world's standard for time; voice processing devices; RF solutions; discrete components; enterprise storage and communication solutions, security technologies and scalable anti-tamper products; Ethernet solutions; Power-over-Ethernet ICs and midspans; as well as custom design capabilities and services. Microsemi is headquartered in Aliso Viejo, California, and has approximately 4,800 employees globally. Learn more at www.microsemi.com.

Microsemi and the Microsemi logo are registered trademarks or service marks of Microsemi Corporation and/or its affiliates. Third-party trademarks and service marks mentioned herein are the property of their respective owners.

"Safe Harbor" Statement under the Private Securities Litigation Reform Act of 1995: Any statements set forth in this news release that are not entirely historical and factual in nature, including without limitation statements related to the availability of its aerospace power core module (PCM) with an integrated field programmable gate array (FPGA) and hybrid power drive (HPD) stage, and its potential effects on future business, are forward-looking statements. These forward-looking statements are based on our current expectations and are inherently subject to risks and uncertainties that could cause actual results to differ materially from those expressed in the forward-looking statements. The potential risks and uncertainties include, but are not limited to, such factors as rapidly changing technology and product obsolescence, potential cost increases, variations in customer order preferences, weakness or competitive pricing environment of the marketplace, uncertain demand for and acceptance of the company's products, adverse circumstances in any of our end markets, results of in-process or planned development or marketing and promotional campaigns, difficulties foreseeing future demand, potential non-realization of expected orders or non-realization of backlog, product returns, product liability, and other potential unexpected business and economic conditions or adverse changes in current or expected industry conditions, difficulties and costs in implementing the company's acquisitions and divestitures strategy or integrating acquired companies, uncertainty as to the future profitability of acquired businesses and realization of accretion from acquisition transactions, difficulties and costs of protecting patents and other proprietary rights, inventory obsolescence and difficulties regarding customer qualification of products. In addition to these factors and any other factors mentioned elsewhere in this news release, the reader should refer as well to the factors, uncertainties or risks identified in the company's most recent Form 10-K and all subsequent Form 10-Q reports filed by Microsemi with the SEC. Additional risk factors may be identified from time to time in Microsemi's future filings. The forward-looking statements included in this release speak only as of the date hereof, and Microsemi does not undertake any obligation to update these forward-looking statements to reflect subsequent events or circumstances.

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
More Editorial  
Latest Blog Posts
Colin WallsEmbedded Software
by Colin Walls
Variable declarations in C – plenty of pitfalls
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
AUGER: Celebrating Our Users
2021 EDACafe PredictionsEDACafe Editorial
by 2021 EDACafe Predictions
Atmosic Technologies Electronics Design Industry Predictions
Jobs
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
ASIC Engineer for Amazon at seattle, Washington
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
SerDes Applications Design Engineer for Xilinx at San Jose, California
Upcoming Events
IPC APEX EXPO 2021 Goes Virtual at - Mar 8 - 12, 2021
ADAS Sensors 2021 at The Henry Hotel 300 Town Center Drive Dearborn MI - Apr 7 - 8, 2021
ISQED'21 - 22nd International Symposium at POB 607 Los Altos CA - Apr 7 - 9, 2021
SEMI MEMS & Sensors Industry Group (MSIG), MSTC 2021 at United States - Apr 13 - 15, 2021
Verific: SystemVerilog & VHDL Parsers



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise