Toshiba Launches Bipolar Stepping Motor Driver IC That Needs No Current Detection Resistors

TOKYO — (BUSINESS WIRE) — January 24, 2017Toshiba Corporation's (TOKYO:6502) Storage & Electronic Devices Solutions Company today announced the launch of “TB67S508FTG,” a bipolar stepping motor driver offering 40V high voltage and 3.0A current with no need for external current detection resistors. Sample shipment starts today.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20170124005691/en/

Toshiba: a bipolar stepping motor driver "TB67S508FTG" offering 40V high voltage and 3.0A current wi ...

Toshiba: a bipolar stepping motor driver "TB67S508FTG" offering 40V high voltage and 3.0A current with no need for external current detection resistors. (Photo: Business Wire)

Printers, office automation equipment, surveillance cameras, banking terminals such as ATMs, banknote identification machines, amusement machines, and home appliances are being downsized to save space and improve design. Low power consumption is also growing in importance as a means to scale down IC boards and reduce internal heat in products.

The new IC integrates Toshiba’s ACDS[1] architecture, adopted previously in a unipolar stepping motor driver IC. It eliminates the need for two external resistors usually required to detect motor current. By adopting a small QFN36 package (mounting area 5 mm × 5 mm), the new IC reduces the mounting area to about 66% of that of Toshiba’s current products[2]. ACDS also reduces power loss and resistor variation errors, and contributes to low power consumption and highly precise constant current control.

Main Features of the New Product

  • No need for external resistors to detect current.
    ACDS, Toshiba’s original architecture, realizes highly precise constant current motor control without external resistors to detect current.
  • Lower heat generation during motor driving.
    A built-in output DMOS with low-on-resistance (0.45Ω (upper + lower: typ.)) reduces heat generation by 13% when the stepping motor drives operate at 1A, compared to Toshiba’s current products[3] .
  • Small package
    A small, high-heat-radiation QFN36 package saves space and reduces costs.
 

Main Specifications

Part Number   TB67S508FTG
Function Stepping motor driver
Package QFN36
I/F Clock input and phase input
Step resolution modes Full, half, quarter
Output rating (voltage) 40V
Output rating (current) 3A
Output ON resistor (upper + lower) 0.45Ω (typ.)
Power supply Support single power drive
Abnormality detection

Thermal shutdown, over current detection, low power and under voltage detection, and OSCM terminal component open / short detection

Other functions   ACDS and ADMD [4]
 
Notes:
1:   ACDS: Advanced Current Detect System.
2: Basis for comparison
Current product: Two detection resistors (5 mm × 2.5 mm) connected to the current IC (7 mm × 7 mm) with QFN48 package

New product: (5 mm × 5 mm)

3: Compared with the current product, TB62213AFTG (maximum output rating 40V/3A)
4: ADMD: Advanced Dynamic Mixed Decay.
 

1 | 2  Next Page »



Review Article Be the first to review this article
Featured Video
Editorial
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
ESD Alliance/Accellera Panel Takes Executive View on Returning to the Office
Vincent ThibautArteris IP Blog
by Vincent Thibaut
Arteris IP Extends IP-XACT to UVM Testbenches
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Specification Automation for Designers
Jobs
Circuit Design & Layout Simulation Engineer - Co-Op (Spring 2021) for Global Foundaries at Santa Clara, California
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Logic Design Engineer for Intel at Santa Clara, California
Upcoming Events
DesignCon 2021 at San Jose McEnery Convention Center San Jose, CA San Jose CA - Aug 16 - 18, 2021
SEMICON Southeast Asia 2021 Hybrid Event at Setia SPICE Convention Centre Penang Malaysia - Aug 23 - 27, 2021
SEMI Europe Summit at Online, Central European Time Germany Germany - Sep 1 - 3, 2021
7th International Conference on Sensors & Electronic Instrumentation Advances (SEIA' 2021) at Palma de Mallorca, Mallorca balearic islands) Spain - Sep 14 - 16, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise