Renesas Electronics Unveils Industry-Leading Fully Encapsulated Dual 30A and Single 33A Digital Power Modules

ISL8274M Dual 30A and ZL9024M 33A Modules Offer Highest Power Density and Efficiency for Advanced FPGAs, DSPs, ASICs, and Memory

TOKYO — (BUSINESS WIRE) — January 31, 2018 — Renesas Electronics Corporation (TSE:6723), a premier supplier of advanced semiconductor solutions, today announced two new fully encapsulated digital DC/DC PMBus® power modules that deliver the highest power density and efficiency in their class. The dual ISL8274M operates from a 5V or 12V power rail, provides two 30A outputs and up to 95.5 percent peak efficiency in a compact 18mm x 23mm2 footprint. The new ZL9024M operates from a 3.3V rail and outputs 33A of power in a 17mm x 19mm2 footprint. They deliver point-of-load (POL) conversions for advanced FPGAs, DSPs, ASICs and memory used in servers, telecom, datacom, optical networking and storage equipment. Both devices are easy-to-use, PMBus-configurable power supplies that include a controller, MOSFETs, inductor and passives encapsulated inside a module that increases available board space and reduces bill of materials (BOM).

This press release features multimedia. View the full release here: http://www.businesswire.com/news/home/20180131005440/en/

Renesas fully encapsulated dual 30A and single 33A digital power modules (Graphic: Business Wire)

Renesas fully encapsulated dual 30A and single 33A digital power modules (Graphic: Business Wire)

The ISL8274M and ZL9024M digital power modules leverage Renesas’ patented ChargeMode™ control architecture, which provides the highest efficiencies with better than 90 percent on most conversions. The power modules also provide a single clock cycle fast transient response to output current load steps common in FPGAs and DSPs that process power bursts. Their compensation-free design keeps the modules stable regardless of output capacitor changes due to temperature, variation or aging. Eliminating the need for an external discrete compensation network also saves board space and additional BOM cost. The ISL8274M supports input voltages from 4.5V to 14V, while the ZL9024M accepts input voltages from 2.75V to 4V. Both modules offer adjustable output voltages as low as 0.6V.

The encapsulated modules use Renesas’ proprietary High Density Array (HDA) package, which offers unmatched electrical and thermal performance through a single-layer conductive substrate that reduces lead inductance and dissipates heat primarily through the system board. The HDA’s copper lead-frame structure allows the modules to operate at full load over a wide temperature range with no airflow or heatsinks. The ISL8274M and ZL9024M also provide several protection features that ensure safe operations under abnormal operating conditions, further enhancing their robustness and reliability.

“The ISL8274M and ZL9024M expand Renesas’ portfolio of encapsulated digital power modules and provides customers the first digital dual 30A power supply and first digital 33A power supply,” said Philip Chesley, Vice President of Industrial Analog and Power Business Division, Renesas Electronics Corporation. “Their power density, high efficiency and fast transient response address our customers demanding single and multi-rail power requirements.”

Key Features of the ISL8274M Digital Power Module

  • 30A dual digital switch mode power supply with input voltage range from 4.5V to 14V and programmable Vout from 0.6V to 5V
  • PMBus-enabled solution for full system configuration, telemetry and monitoring of all conversions and operating parameters
  • Programmable Vout, soft-start, soft-stop, sequencing, margining and under-voltage, over-voltage, under-current, over-current, under temperature and over-temperature
  • Monitors Vin, Vout, Iout, temperature, duty cycle, switching frequency, and faults
  • Power good indicator, and ±1.2% Vout accuracy over line, load, and temperature
  • Pin-strap mode using external resistors for standard settings
  • Internal nonvolatile memory saves module configuration parameters and fault logging

Key Features of the ZL9024M Digital Power Module

  • 33A digital switch mode power supply with input voltage range from 2.75V to 4V and programmable Vout from 0.6V to 1.5V
  • PMBus-enabled solution for full system configuration, telemetry and monitoring of all conversions and operating parameters
  • Programmable Vout, soft-start, soft-stop, sequencing, margining and under-voltage, over-voltage, under-current, over-current, under temperature and over-temperature
  • Monitors Vin, Vout, Iout, temperature, duty cycle, switching frequency, and faults
  • Power good indicator, and ±1.2% Vout accuracy over line, load, and temperature
  • Pin-strap mode using external resistors for standard settings
  • Internal nonvolatile memory saves module configuration parameters and fault logging

1 | 2  Next Page »



Review Article Be the first to review this article
Aldec

 Advanced Asembly

Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
You’re Invited! CEO Outlook May 18
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Automating the UVM Register Abstraction Layer (RAL)
Jobs
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Staff SerDes Applications Design Engineer for Xilinx at San Jose, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
Electronics Engineer for Lockheed Martin at Sunnyvale, California
ASIC Engineer for Juniper Networks at Sunnyvale, California
Technical Product Manager- SISW-EDA 238452 for Siemens AG at Fremont, California
Upcoming Events
DVCon China 2021 at Shanghai China - May 26, 2021
CadenceLIVE Americas 2021 at United States - Jun 8 - 9, 2021
DesignCon 2021 at San Jose McEnery Convention Center San Jose, CA San Jose CA - Aug 16 - 18, 2021
SEMICON Southeast Asia 2021 Hybrid Event at Setia SPICE Convention Centre Penang Malaysia - Aug 23 - 27, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise