Noisecom Introduces New Millimeter Wave Noise Sources for Over-the-Air Testing of 5G Devices

PARSIPPANY, N.J. — (BUSINESS WIRE) — October 30, 2018 — Noisecom, a Wireless Telecom Group Company (NYSE American:WTT), today introduced new models of the popular NC3600 Calibrated Noise Source product line for over-the-air testing of 5G chipsets and millimeter wave devices. These new High Excess Noise Ratio (ENR) noise sources cover frequencies up to 45 GHz providing a known source for characterizing 5G devices in the millimeter wave bands. The high ENR characteristics of the NC3600 noise sources makes them the ideal source for making measurements in applications where the test setup can have significant losses from antennas, cables, and the air, such as in test chambers and enclosures used for over-the-air testing. Typically these tests are set up using expensive microwave and millimeter wave signal generators, but NC3600 High ENR noise sources in these frequency bands are now available at a fraction of the cost, dramatically reducing the cost of test.

“Making reliable and repeatable measurements inside any chamber or enclosure requires the chamber, and test system as whole, be calibrated and quantified,” said Dr. Lee McMillan, Director of Engineering. “Noisecom NC3600 noise sources are ideal for this type of calibration process as they provide a known source with calibrated data points that can be used to determine cable loss, air path loss, antenna efficiency, and total chamber response.”

As chipsets for 5G devices become more highly integrated devices with embedded power amplifiers and antennas with frequencies increasing to millimeter wave bands, conducted power measurements are now physically impractical to perform. These new multiple-in, multiple-out (MIMO) devices provide minimal access to physical test points making conducted measurements impossible, requiring the use of radiated or over-the-air testing techniques. The new NC3600 millimeter wave noise sources, along with the broad range of other noise sources developed by Noisecom are playing a significant role in over-the-air test systems and 5G communications. With the ability to extend beyond the traditional cable-based methods, Noisecom is demonstrating its innovation and readiness for future testing requirements in wireless communications.

For more information visit, www.noisecom.com.

About Wireless Telecom Group

Wireless Telecom Group, Inc., comprised of Boonton Electronics, CommAgility, Microlab and Noisecom, is a global designer and manufacturer of advanced RF and microwave components, modules, systems and instruments. Serving the wireless, telecommunication, satellite, military, aerospace, semiconductor and medical industries, Wireless Telecom Group products enable innovation across a wide range of traditional and emerging wireless technologies. With a unique set of high-performance products including peak power meters, signal analyzers, signal processing modules, LTE PHY and stack software, power splitters and combiners, GPS repeaters, public safety monitors, noise sources, and programmable noise generators, Wireless Telecom Group supports the development, testing, and deployment of wireless technologies around the globe.

Wireless Telecom Group, Inc.’s website address is www.wtcom.com. Except for historical information, the matters discussed in this news release may be considered "forward-looking" statements within the meaning of Section 27A of the Securities Act of 1933, as amended, and Section 21E of the Securities Exchange Act of 1934, as amended. Such statements include declarations regarding the intent, belief or current expectations of the Company and its management. Prospective investors are cautioned that any such forward-looking statements are not guarantees of future performance and involve a number of risks and uncertainties that could materially affect actual results. Such risks and uncertainties are identified in the Company's reports and registration statements filed with the Securities and Exchange Commission, including its Annual Report on Form 10-K for the year ended December 31, 2017.



Contact:

Wireless Telecom Group Inc.
Marketing:
Maria Droge, 1 973-386-9696
or
Investor Relations:
John Nesbett or Jen Belodeau, 1 203-972-9200
www.wtcom.com




Review Article Be the first to review this article
Aldec

New Customer Special

Featured Video
Jobs
Senior and (less) Senior Design Verification Engineers for EDA Careers at San Jose and Austin, California
Senior Account Managers… FORMAL VERIFICATION...VALLEY for EDA Careers at San Jose, California
Senior Analog Design Engineers #5337 for EDA Careers at EAST COAST, California
Senior Layout Engineer for EDA Careers at EAST COAST, California
Upcoming Events
Linley Spring Processor Conference - NOW A VIRTUAL EVENT at Virtual Event CA - Apr 6 - 9, 2020
Embedded Vision Summit 2020 at Santa Clara Convention Center Santa Clara CA - May 18 - 21, 2020
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise