Introspect Technology Adds MIPI C-PHY and D-PHY Frame Grabber Solutions for CSI-2 Image Sensors

Based on the company's E Series modules, the SV4E-CPRXG and SV4E-DPRXG are necessary for validating vision and imaging systems based on MIPI CSI-2 video links

MONTREAL, Quebec, Feb. 27, 2020 — (PRNewswire) —

MONTREAL, Quebec, Feb. 27, 2020 /PRNewswire-PRWeb/ -- Introspect Technology, leading manufacturer of test and measurement tools for high-speed digital applications, today released two new frame grabber solutions for the validation and optimization of image sensors based on the MIPI® Alliance Camera Serial Interface 2 (CSI-2 SM) standard and targeting the MIPI Alliance C-PHY SM and D-PHY SM physical layers. Because of their enhanced features, these image sensors are finding widespread use in non-consumer applications such as industrial, imaging, and machine vision, and this trend has resulted in the need for a new breed of frame grabber solutions supporting high-speed C-PHY and D-PHY physical layers. The highly flexible SV4E-CPRXG MIPI C-PHY Frame Grabber and SV4E-DPRXG MIPI D-PHY Frame Grabber modules enable rapid frame capturing and image processing on any host computer platform, and they support the latest MIPI Alliance specifications.

Beyond Selfies: How Frame Grabbers Help Develop High Performance CSI-2 Sensors

Image sensors have been used prolifically in many industrial, vision, and imaging applications, and this was traditionally achieved through the use of high-resolution optical sensing arrays that were coupled with wide-bandwidth digital transfer links. At the same time, consumer-grade sensors based on the MIPI CSI-2 specifications started to offer a rich set of features that made them especially attractive for other high-performance applications. For example, CSI-2 sensors now include high dynamic range support, brightness control, contrast control, variable frame rate, and many other features that have been made possible by the latest MIPI Alliance C-PHY and D-PHY physical layer standards. They are even used for sensing non-optical inputs such as radar signals.

The new breed of CSI-2 sensors now need to be tested and validated for real-life situations involving continuous (high frame rate) captures and continuously variable stimulus conditions – not just single-frame analysis. To address this, a frame grabber is needed that supports:

  • Live streaming to a host computer
  • Capturing large sequences of contiguous images from a single video stream
  • Dynamically controlling the sensor parameters while continuously modifying input and environmental conditions

The above requirements can all be enabled using the SV4E-CPRXG MIPI C-PHY Frame Grabber for C-PHY based CSI-2 sensors and the SV4E-DPRXG MIPI D-PHY Frame Grabber for D-PHY based CSI-2 sensors. Each of these modules can be attached to any CSI-2 camera output or radar output, and it will automatically extract image data and provide for automated application development, calibration, regression testing.

Features of the Introspect Technology C-PHY and D-PHY Frame Grabbers

Introspect Technology's C-PHY and D-PHY frame grabbers leverage many generations of hardware and software tools for MIPI, and they are optimized for the C-PHY and D-PHY physical layers, respectively. The following is a list of their main features:

  • Any rate operation from 80 Msps to 3.5 Gsps (or 80 Mbps to 3.5 Gbps)
  • Any CSI-2 lane configuration
  • Support for all CSI-2 data types and pixel formats, including RAW16 and RAW20
  • Automatic isolation of all CSI-2 virtual channels according to the latest revision of the CSI-2 specifications
  • Integrated I2C master for controlling sensors under test
  • Integrated I3C master for controlling sensors under test
  • Support for contiguous frame capture at the maxim frame rate supported by the CSI-2 specifications
  • Advanced exposure features including frame start and line start trigger I/O's
  • Built-in frame rate monitors
  • Built-in programmable power supplies for automating the turn-on and turn-off of sensors under test

With the deployment of MIPI CSI-2 based sensors into a wider range of applications, there is a strong need for flexible and robust frame grabber solutions that can handle the latest physical layer characteristics of these sensors. Introspect Technology's unique analog front-end technology for both C-PHY and D-PHY means that users can achieve high-confidence sensor validation without worrying about physical attachment issues.

Introspect Technology's SV4E-CPRXG MIPI C-PHY Frame Grabber and SV4E-DPRXG MIPI D-PHY Frame Grabber are both available for purchase now from Introspect Technology or through one of its approved worldwide distributors.

About Introspect Technology

Introspect Technology designs and manufactures innovative test and measurement tools for high-speed digital applications. Whether it is the next smartphone or the level-4 autonomy engine in a mobility solution, our instruments are used to help develop, test, and manufacture next-generation products. In other words, we help the leading semiconductor, automotive, and telecommunications companies make tomorrow's technology today's possibility.

 

SOURCE Introspect Technology

Contact:
Company Name: Introspect Technology




Review Article Be the first to review this article
Aldec

Featured Video
Jobs
Sr. Application Engineer for Mentor Graphics at Fremont, California
Senior Software Engineer for EDA Careers at San Jose, California
Senior and (less) Senior Design Verification Engineers for EDA Careers at San Jose and Austin, California
Senior Account Managers… FORMAL VERIFICATION...VALLEY for EDA Careers at San Jose, California
Upcoming Events
Linley Spring Processor Conference at Virtual Event CA - Apr 6 - 9, 2020
Embedded Vision Summit 2020 at Santa Clara Convention Center Santa Clara CA - May 18 - 21, 2020
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise