Texas Instruments unites speed and efficiency with industry's fastest dual, 14-bit ADC

New 250-MSPS data converter provides 66 percent greater bandwidth than competing dual ADCs

DALLAS, April 20 /PRNewswire-FirstCall/ -- Texas Instruments Incorporated (TI) (NYSE: TXN) today introduced a dual, 14-bit analog-to-digital converter (ADC) at 250 MSPS (mega samples per second) to deliver a premier combination of wide signal bandwidth, high dynamic performance and low power consumption. The ADS62P49 achieves 73-dBFS signal-to-noise ratio (SNR) and 85-dBc spurious-free dynamic range (SFDR) at an input frequency of 60 MHz. With the industry's fastest sample rate, the ADS62P49 provides increased signal bandwidth without compromising range and sensitivity in communications and defense imaging systems or accuracy in wide-band test and measurement equipment. (For more information or samples, see www.ti.com/ads62p49-pr)

"Communications, defense and test design engineers are constantly challenged to create signal and data acquisition receivers with increasingly wide signal bandwidths that do not compromise overall system performance," said Art George, senior vice president of TI's High-Performance Analog business unit. "TI addresses these challenges with the ADS62P49 which delivers high-performance, compact, power-efficient designs and enables rapid deployment of 3G and 4G systems, software defined radios and spectrum analyzers."

Key features and benefits of the ADS62P49

    --  Fastest dual, 14-bit ADC at 250 MSPS enables multi-channel,
        wide-bandwidth sampling without sacrificing dynamic performance, for
        enhanced accuracy in portable test equipment
    --  Low power of 625 mW per channel reduces thermal footprint for increased
        system efficiency in high-density, multi-antenna base station receivers
        and software defined radios
    --  Programmable gain and other user-selectable settings maximize design
        flexibility. Internal gain up to 6 dB in 1-dB steps allows customers to
        optimize SNR, SFDR and input swing based on the unique need of their
        applications.  Designers can maximize SNR to enhance linearization
        effectiveness in digital pre-distortion (DPD) solutions, while SFDR can
        be increased and input drive reduced to improve small-signal analysis in
        defense and radio receiver applications
    --  Complete signal chain with comprehensive evaluation tools suite speeds
        time to market. Complementary products include: DACs (DAC5682Z,
        DAC5688), amplifiers (THS4509), RF components (TRF3703, TRF3761), DPD
        transmit processors (GC5325), clock distribution circuits (CDCE72010)
        and digital signal processors (TMS320C674x)

-- First in a series of four 12- and 14-bit dual channel ADCs with sample rates of 210 and 250 MSPS (ADS62P28, ADS62P29, ADS62P48). Pin-compatible to dual-channel ADS6000 family for easy upgrades in speed and resolution

Availability and pricing

The ADS62P49 is available today in a 9 mm x 9mm QFN package for $144.75 in 1,000-piece quantities. The ADS62P49EVM has on-board sockets for a voltage-controlled crystal oscillator, crystal filter and TI's newest high-performance clock distribution and jitter cleaning chip, the CDCE72010, which allows the EVM to function as a system-level evaluation kit and an ADC evaluation board.

Customers can also leverage TI's TSW1200 digital capture tool for rapid evaluation of LVDS-output ADCs of up to 16-bit resolution and 500-MSPS sample rates to enable prototyping of complex systems and to further speed development time.

Find out more about TI's high-speed data converters at the links below:

    --  Order ADS62P49 evaluation modules and samples:  www.ti.com/ads62p49-pr

-- See data converter portfolio and selection guide: www.ti.com/dataconverters-pr

About Texas Instruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through design, sales and manufacturing operations in more than 30 countries. For more information, go to www.ti.com.

    Please refer all reader inquiries to:
    Texas Instruments Incorporated
    Semiconductor Group, SC-09039
    Literature Response Center
    14950 FAA Blvd.
    Fort Worth, TX  76155
    1-800-477-8924

Trademarks

All registered trademarks and other trademarks belong to their respective owners.

Web site: http://www.ti.com/




Review Article Be the first to review this article
Aldec

New Customer Special

Featured Video
Editorial
Roberto FrazzoliEDACafe Editorial
by Roberto Frazzoli
Linley Fall Processor Conference 2020 – Part One
More Editorial  
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
A Unified Flow for Embedded Systems Development
Colin WallsEmbedded Software
by Colin Walls
Time for a new programming paradigm?
Jobs
Director Technical and Corporate Marketing for EDA Careers at San Jose, California
Product Line Manager for EDA Careers at Multiple, North Carolina
IC Design Engineer - SoC Integration for Xilinx at San Jose, California
Senior Application Engineer Formal Verification for EDA Careers at San Jose and Austin, California
Principle Digital Design ASIC Manager for EDA Careers at RTP, North Carolina
Test Engineer for Marvell Semiconductor at Santa Clara, California
Upcoming Events
International Conference on Computer Aided Design (ICCAD) 2020 at San Diego Mission Bay Resort San Diego CA - Nov 2 - 5, 2020
2020 International Conference On Computer Aided Design at San Diego Mission Bay Resort San Diego CA - Nov 2 - 5, 2020
SUBMIT YOUR PAPER TO THE 2020 ITC! at Washington DC - Nov 3 - 5, 2020
TrueCircuits:



© 2020 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise