Synopsys Delivers Optimized Lynx Design System for Common Platform 32/28-nm Technology

Integrated and Pre-Validated Solution Speeds Design of Advanced SoCs

MOUNTAIN VIEW, Calif., June 14 — (PRNewswire) — Synopsys, Inc. (Nasdaq: SNPS), a world leader in software and IP for semiconductor design, verification and manufacturing, today announced it is delivering an optimized, pre-validated design environment for the Common Platform alliance (CPA) 32/28-nanometer(nm) high-k metal gate (HKMG) technology based on Synopsys' Lynx Design System. Accomplished under a multi-year collaboration with ARM and the Common Platform alliance [ IBM, Samsung Electronics, Co., Ltd., GLOBALFOUNDRIES], the optimizations to the Lynx Design System and its Galaxy™ Implementation Platform-enabled flow for ARM's advanced physical IP and the ARM Cortex™ A9 MPCore processor reduce risk and total development cost for advanced 32/28nm system-on-chip (SoC) designs.

Synopsys' support for the HKMG 32/28-nm technology includes:

  • An optimized Lynx Design System
    • A flow configured for the pre-validated ARM CPA 32/28-nm LP standard cells and memories, which expedites design setup and start
    • Baseline design checks and guidelines for the CPA 32/28-nm LP node that speed design closure and tapeout
    • A performance- and power-optimized implementation flow for the ARM Cortex-A9 MPCore processor that targets GHz+ results using ARM physical IP
    • An environment for full SoC integration of processors, peripherals and interface IP
  • Full Synopsys Galaxy Implementation Platform enablement for the 32/28-nm LP technology
  • Silicon-proven Synopsys DesignWare® connectivity IP, such as USB 2.0 On-the-Go (OTG) PHY

"Along with our partners in the Common Platform alliance, we have collaborated with Synopsys to tune the Lynx Design System and DesignWare connectivity IP for 32/28-nanometer low-power process technology," said Andy Brotman, vice president of Design Infrastructure at GLOBALFOUNDRIES. "Our customers are now able to immediately benefit from the unique advantages of ARM physical IP and Synopsys tools, flows and IP for a low risk, scalable path to implementing their designs in our 28 nanometer HKMG technology."

"Through early and deep collaboration between ARM, Synopsys and the Common Platform alliance, designers have a rich design environment for 32/28 nanometer SoCs that takes full advantage of the IP, tools and process technology," said Simon Segars, EVP and GM, physical IP division at ARM. "The jointly-optimized design flow in the Lynx Design System aims at achieving gigahertz-plus results 'out of the box' with ARM physical IP for  our Cortex-A9 MPCore advanced processor, which is at the heart of leading mobile SoC designs."

"By leveraging the collaborative strengths of ARM, the Common Platform alliance and Synopsys, we are delivering a production-ready design solution that enables our mutual customers to adopt the latest technologies for their most advanced chips," said John Koeter, vice president of Marketing for the Solutions Group at Synopsys. "Building on silicon-proven products such as the Lynx Design System, Galaxy Implementation Platform tools and DesignWare IP enables our customers to mitigate their project risks and streamline their implementation process."


The Synopsys Lynx Design System is available immediately from Synopsys: ARM physical IP for the 32/28-nm HKMG process is readily accessible from ARM through DesignStart: The CPA 32/28-nm LP HKMG process and enabled PDKs are available from respective CPA companies: GLOBALFOUNDRIES, IBM and Samsung.

About Synopsys

Synopsys, Inc. (Nasdaq: SNPS) is a world leader in electronic design automation (EDA), supplying the global electronics market with the software, intellectual property (IP) and services used in semiconductor design, verification and manufacturing. Synopsys' comprehensive, integrated portfolio of implementation, verification, IP manufacturing and field-programmable gate array (FPGA) solutions helps address the key challenges designers and manufacturers face today, such as power and yield management, system-to-silicon verification and time-to-results. These technology-leading solutions help give Synopsys customers a competitive edge in bringing the best products to market quickly while reducing costs and schedule risk. Synopsys is headquartered in Mountain View, California, and has more than 65 offices located throughout North America, Europe, Japan, Asia and India. Visit Synopsys online at

Synopsys, DesignWare, and Galaxy are trademarks or registered trademarks of Synopsys, Inc. All other trademarks or registered trademarks mentioned in this release are the intellectual property of their respective owners.

Editorial Contacts:

Sheryl Gulizia

Synopsys, Inc.


Email Contact

Lisa Gillette-Martin

MCA, Inc.

650-968-8900 ext. 115

Email Contact

SOURCE Synopsys, Inc.

Synopsys, Inc.
Sheryl Gulizia of Synopsys, Inc.
Phone: +1-650-584-8635
Email Contact
Lisa Gillette-Martin of MCA, Inc.
Phone: +1-650-968-8900, ext. 115
Email Contact

Review Article Be the first to review this article

Latest Blog Posts
Michelle Mata-ReyesAldec Design and Verification
by Michelle Mata-Reyes
ARM-based SoC Co-Emulation using Zynq Boards
Salesforce Technical Lead   East Coast  for EDA Careers at Cherry Hill, New Jersey
Hardware Engineer, Board Design for Arista Networks at Santa Clara, California
Sr. Application Engineer for Mentor Graphics at Fremont, California
Senior Account Managers… FORMAL VERIFICATION...VALLEY for EDA Careers at San Jose, California
Senior Software Architect Internet for EDA Careers at San Jose, California
Upcoming Events
FLEX 2020 and MSTC 2020 at DoubleTree by Hilton 2050 Gateway Place San Jose CA - Feb 24 - 27, 2020
DVCon U.S. 2020 at DoubleTree Hotel San Jose CA - Mar 2 - 5, 2020
OFC 2020 - The Optical Networking and Communication Conference & Exhibition at San Diego Convention Center San Diego CA - Mar 8 - 12, 2020
DATE '2020 at ALPEXPO Grenoble France - Mar 9 - 13, 2020

© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise