Akustica’s New AKU230 Digital Microphone is Bosch-Built; Includes World’s Smallest Fully Integrated MEMS Device

  • First Akustica CMOS MEMS microphone manufactured by Bosch
  • Monolithic microphone die is world’s smallest at only 0.70mm²
  • Industry-standard form, fit and function for easy integration

PITTSBURGH — (BUSINESS WIRE) — March 30, 2011Akustica, Inc., inventors of the first single-chip digital micro-electromechanical systems (MEMS) microphone—today announced a new single-chip digital MEMS microphone for high-quality voice applications in laptops, tablets and netbook PCs.

The new AKU230—which represents Akustica’s 4th-generation MEMS microphone—is the company’s first product that leverages the extensive MEMS fabrication capabilities and global supply chain of Bosch, which acquired Akustica in 2009. Akustica chose to move production of their newest complementary metal-oxide semiconductor (CMOS) MEMS microphone to the Bosch foundry in Reutlingen, Germany because of Bosch’s unparalleled MEMS manufacturing experience and the rigorous standards of quality that have allowed Bosch to ship more than 1.6 billion MEMS sensors worldwide.

“Bosch ships more than 200 million MEMS sensors annually,” said Dr. Stefan Finkbeiner, CEO and general manager of Akustica. “With access to Bosch resources, Akustica is further able to deliver on-time and to-specification the tens of millions of MEMS microphones that our customers are demanding now and in the future.”

In-House Design and Manufacturing Capabilities

The AKU230 leverages Akustica’s patented monolithic CMOS MEMS platform, a technology which integrates the mechanical function of microphones and other sensors with analog and digital electronics—all in a single chip. Unlike other MEMS microphone manufacturers who may buy any or all of their MEMS, ASIC, and package design from a third party, Akustica has always maintained a complete in-house MEMS, ASIC, and package design-team. Now, as part of Bosch, Akustica has added in-house foundry capabilities. This combination of in-house design and fabrication enables a new level of MEMS innovation that allows the company to rapidly develop both tailored solutions for customers and compelling features for new products.

For example, close collaborations between the design and manufacturing teams for the AKU230 enabled Akustica to shrink the size of the monolithic AKU230 die so that the microphone die, which contains the microphone membrane, amplifier and sigma-delta converter, is only 0.84mm x 0.84mm. This means the AKU230’s single-chip CMOS MEMS die is not only significantly smaller than competitors’ microphone sensors, but it is also believed to be the smallest fully-integrated MEMS device in the world.

Convenient Electronic Design and Integration

The AKU230’s form factor, interface circuitry and performance were designed to industry standards, making it easy for equipment manufacturers to design Akustica’s digital MEMS microphone into high-volume camera modules or mass-market mobile computers.

With a footprint of 3.76 x 4.72mm, and just 1.25mm tall, the AKU230 package is also 30% thinner than the previous generation of digital microphones, and is ideally suited to thin form-factor integrations.

The AKU230 features:

  • -26 dBFS +/-2dB Sensitivity
  • 56 dB typical SNR
  • -57 dBFS Power Supply Rejection
  • An industry-standard, ultra-small, ultra-thin package which fits inside the bezels of even the smallest tablet computers
  • Highly-matched sensitivity control and stereo-microphone data multiplexing, ideal for dual microphone arrays that create directionality and noise suppression to enhance audio quality
  • Immunity to radio frequency and electromagnetic interference, further improving voice capture

According to the research firm iSuppli, the digital microphone category is expected to reach nearly 450 million units by 2014: an annual growth rate of over 40 percent. “Akustica created the digital microphone market back in 2006,” said Jérémie Bouchaud, director and principal analyst, MEMS and Sensors, IHS iSuppli. “The AKU2000 was the first digital silicon microphone, and Akustica’s line of products is still the only family of monolithic MEMS microphones in the market today. Digital MEMS microphones are now embedded in millions of laptops, netbooks and other consumer-electronic devices due to their small size, ease of integration and immunity to EM and RF interference.”

Price and Availability

The AKU230 is in mass production and is priced at $1.30 in 10K-unit quantities. Available in a robust LGA package, the AKU230 is designed for high-volume assembly into camera modules, microphone arrays, and other consumer electronic platforms. For ordering or technical information on the AKU230, please visit www.akustica.com or contact: Email Contact.

1 | 2  Next Page »

Review Article Be the first to review this article

Featured Video
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Why Users Care about EDA Partnerships
2021 EDACafe PredictionsEDACafe Editorial
by 2021 EDACafe Predictions
IAR Systems Embedded Development Trends 2021
Senior Java Developer/Architect for EDA Careers at Varies, North Carolina
ASIC Engineer for Amazon at seattle, Washington
Staff SerDes Applications Design Engineer for Xilinx at San Jose, California
Senior Application Engineer Formal Verification for EDA Careers at California or Austin, California
SerDes Applications Design Engineer for Xilinx at San Jose, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Upcoming Events
Si2 AI/ML Winter Workshop at United States - Jan 29, 2021
virtual DATE 2021 at France - Feb 1 - 5, 2021
SEMI Technology Unites Global Summit at United States - Feb 15 - 19, 2021
DVCon U.S. 2021 at Virtual - Mar 1 - 4, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise