July 03, 2006
The Business of DFM
Please note that contributed articles, blog entries, and comments posted on EDACafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Peggy Aycinena - Contributing Editor


by Peggy Aycinena - Contributing Editor
Posted anew every four weeks or so, the EDA WEEKLY delivers to its readers information concerning the latest happenings in the EDA industry, covering vendors, products, finances and new developments. Frequently, feature articles on selected public or private EDA companies are presented. Brought to you by EDACafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!

Design for manufacturing is a messy business, at least for now, but that's what makes it interesting. Now if we could just make it profitable, as well … and that's what this whole column is about.

Because as much as you and I know that technologists are so interested in DFM, they lay awake at night pondering the difficult physics and engineering of designing things to be supremely manufacturable, what really adds merit and oomph to all of their native curiosity and insomnia is, "Yeah, and can I make money on the solutions I come up with? And will I beat everybody else to the punch?"

This column started back in February at DesignCon in Santa Clara. Canaccord Adams hosted a panel called, "The Business of DFM." The panel was moderated by Dennis Wassung, and the panelists included Riko Radojcic from Qualcomm, Ed Wan from TSMC, Jean-Marie Brunet from Mentor Graphics, Jim Wiley from Brion Technologies, Thomas Blaisi from SIGMA-C, and Yervant Zorian from Virage Logic. The questions under discussion here in EDA Weekly arose from that February panel, and include responses from three of the six panelists, plus Mentor Graphics' Joe Sawicki subbing for Jean-Marie Brunet.

CLICK TO ENLARGE
Joe and I spoke by phone several weeks ago, because he saw my questions for Jean-Marie, and wanted to walk me through some slides he had used earlier in June at a different Canaccord Adams event -- an all-day series of panels in San Francisco, which also addressed the business of DFM.

One of Joe's slides attempted to lay out the current landscape of DFM -- at least from Mentor Graphics' point of view -- so I decided to expand the scope of this column by submitting my questions to all 14 companies on Joe's slide. I heard back from 10 of them, plus a few other companies as well.

So, go get that tall, extra hot, non-fat, with-whip, grande, double-shot, white mocha. This column -- this "virtual panel" on the business of DFM -- is (groan) over 9000 words long and includes feedback from 15 different companies. The “panelists” include:

Jacob Jacobsson, CEO, Blaze DFM
Atul Sharan, President and CEO, Clear Shape
Chenmin Hu, President, Anchor Semiconductor
Dale Pollek, President & CEO, ChipMD
David Thon, Group Product Marketing Director, DFM, Cadence Design Systems
Dwayne Burek, Senior Director, Design Implementation, Magma Design
Joe Sawicki, Vice President & GM, Design-to-Silicon Division, Mentor Graphics
Mike Gianfagna, President & CEO, Aprio Technologies
Naeem Zafar, President & CEO, Pyxis Technology
Nitin Deo, Sr. Vice President, Marketing & Business Development, Ponte Solutions
Riko Radojcic, Leader of the DFM Initiative, Qualcomm
Rob Aitken, ARM Fellow, ARM
Thomas Blaesi, VP of Marketing & Business Development, SIGMA-C
Srinivas Raghvendra, Senior Director of DFM Solutions, Synopsys
Won-Young Jung, CTO & Executive Vice President, Nanno SOLUTIONS
Yervant Zorian, Vice President & Chief Scientist, Virage Logic

When you're done reading and if you find yourself completely addicted to this stuff (the business of DFM, not caffeine), this is your lucky month! Because there's more where this came from in the shape of a panel happening during the last hour of the last day of the Design Automation Conference in San Francisco, “DFM: Where's the Proof of Value?”

Per the organizers: “The aim of this DAC panel is to provide a serious comparison of related DFM technologies on the market and some idea of the cost and difficulty of integrating the tools into a fixed design budget and timeline. Specific results will be cited, along with examples of expected ROI (monetary, quality, reduced time-to-market, and comprehensive yield enhancement). The audience should walk away with enough information to make an informed decision on which companies would make sense for their DFM challenges, to reach their own yield and throughput goals.”

The moderator is Joe Brandenburg, and the panelists include Jacob Jacobsson, Atul Sharan, Joe Sawicki, Naeem Zafar, and Synopsys' Raul Camposano. This promises to be a fascinating hour and an appropriate end-point for DAC 2006. You should plan to attend. It's happening at 4:30 PM on Thursday, July 27th. Hope to see you there!

[Editor's note: If you weren't included in the (thanks to “EDA John”) now-infamous Buzz@DAC.2006 Part 1 here in EDA Weekly , please send me your or your company's 100-word commentary on what you think will be hot at DAC in San Francisco. I need to hear from you by July 12, 2006.]



The Business of DFM …

1) If you're making money in the DFM market, briefly tell me what technology you're selling. Please be succinct. I'm easily confused here (not kidding!).

Jacob Jacobsson, Blaze DFM -- Blaze is receiving orders for our initial “Electrical DFM” product -- Blaze MO. Blaze MO which was announced in May and is available today as a production release, transforms power and timing requirements into manufacturing directives that optimize the manufacturing process for each individual design. The main benefits are lower leakage power and leakage variability resulting in substantial double-digit gains in parametric yield.

Atul Sharan, Clear Shape -- Clear Shape provides technology that accounts for the impact of systematic variation on design. What designers draw and model -- the ideal -- is NOT what is seen on silicon at sub-100 nanometers. These systematic variations are predictable, and the impact is large enough to cause catastrophic failures such as opens and shorts, also called yield "hot spots." Addressing systematic variations requires too many new rules for rule-based DRC to be sufficient on its own. Additionally, post-GDSII OPC is too slow and occurs too late in the process to be useful to designers.

Clear Shape provides model-based DFM tools which have the requisite speed and accuracy to allow designers to identify manufacturing problems up front in the design cycle -- for example, yield hot spots and impact on electrical parameters such as timing, signal integrity and leakage power -- so that they can do silicon-accurate designs and get the maximum from their process.

Chenmin Hu, Anchor Semiconductor -- As an early start-up in DFM, Anchor has made significant revenue. The first paid customer of Anchor was Xilinx, a fabless design company. That was more than three years ago. The technology is mainly in Lithography Process Check to identify potential hot spots in layout designs.

Dale Pollek, ChipMD -- We provide circuit design (Spice-simulation based) analyses and diagnoses for interactive and automatic circuit optimization of performance and yield. In street terms that means: DesignMD automates tasks, provides a lot more circuit knowledge in less time to make the engineer a lot more intelligent so the designer can make smarter decisions (or use automated decisions as desired) in less time to market netting much better (more robust) circuits (i.e., less time to more market share and profits).

We provide one of the only “design for” solutions that is literally aimed at the high-cost/risk engineer level “design” stage of the flow. Not post layout tooling or drafting stuff that certainly helps make a design to improve manufacturability, that stuff certainly is important, but there is just not really much “designing” at that stage anymore, is there? Most of what I've seen called DFM should really be categorized as LIMA -- Layout, Implementation, Manufacturing, or Autopsy of dead silicon.

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8  Next Page »


You can find the full EDACafe event calendar here.

To read more news, click here.


-- Peggy Aycinena, EDACafe.com Contributing Editor.


Rating:
Reviews:
Review Article
  • Dont trust naeem November 28, 2006
    Reviewed by 'anna'
    I think naeem zafar is a dirty man.
    He told me he got anger with his wife coz he got married very early.
    He would automatically turn off with his wife.

    I guessed thatís the reason he wanted to have sex with me.
    He said he wanted to be my royal friends for many years and supported me
    I didnít really believe him but I still gave him a chance to meet him again.

    The second time we met he took off his pants immediately.
    Asked me if his penis is big???
    I was very surprised coz his small one was quite short
    Even he got erected still short than 8 or 7 cm.
    But he was very proud of his short penis and though it was big.
    I think itís very nice people can have self confidence.
    Itís an important factor to become success.

    I didnít have trust in him so I refused to have sex with him.
    So he played his penis in front of me and came in his hand.
    After I watched his show, he asked me to leave soon.
    Luckily, it didnít take long timeÖ

      Was this review helpful to you?   (Report this review as inappropriate)


  • Informative and to the point July 24, 2006
    Reviewed by 'Ronald'
    I've been following Peggy's article for more than three years. It is always fresh and informative. This article gives you a quick history (see NTI section) and future vision (see OPC/RET section).

      Was this review helpful to you?   (Report this review as inappropriate)


Featured Video
Editorial
Roberto FrazzoliEDACafe Editorial
by Roberto Frazzoli
A quick look at the 2021 Linley Fall Processor Conference
More Editorial  
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
An Update on Functional Safety and ISO 26262
Vincent ThibautArteris IP Blog
by Vincent Thibaut
Why Automate Traceability?
Jobs
Business Operations Planner for Global Foundaries at Santa Clara, California
CSM Design Verification Lead for Apple Inc at Cupertino, California
Logic Design Engineer for Intel at Santa Clara, California
Principle Engineer (Analog-Mixed-Signal Implementation) for Global Foundaries at Santa Clara, California
NAND Hardware Engineer for Apple Inc at Cupertino, California
Upcoming Events
RISC-V Summit 2021 - Virtually or in-person at Moscone Center West Hall 747 Howard St San Francisco CA - Dec 6 - 8, 2021
Where is the Functional Safety Standard and Why Adopt It? at Design Automation Conference Moscone West, Room 3001 San Francisco CA - Dec 6, 2021
Semicon West Hybrid 2021 at Moscone North and South San Francisco, CA - Dec 7 - 9, 2021
67th Annual IEEE International Electron Devices Meeting at Hilton San Francisco Union Square hotel San Francisco - Dec 11 - 15, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise