February 16, 2010
A look at EDA in 2010
Please note that contributed articles, blog entries, and comments posted on EDACafe.com are the views and opinion of the author and do not necessarily represent the views and opinions of the management and staff of Internet Business Systems and its subsidiary web-sites.
Gabe Moretti - Contributing Editor

by Gabe Moretti - Contributing Editor
Posted anew every four weeks or so, the EDA WEEKLY delivers to its readers information concerning the latest happenings in the EDA industry, covering vendors, products, finances and new developments. Frequently, feature articles on selected public or private EDA companies are presented. Brought to you by EDACafe.com. If we miss a story or subject that you feel deserves to be included, or you just want to suggest a future topic, please contact us! Questions? Feedback? Click here. Thank you!

The first thing I extracted from the responses I received to my request for a 2010 forecast from EDA companies is that no one tried to provide a financial forecast. Although I expected such an outcome, I was hoping to be wrong. The problem is that our planet is going through some very challenging times, both in the developed and the developing countries, although for different reasons. This makes forecasting financial results quite difficult since our small EDA industry can be significantly impacted by factors outside the electronics industry.

The Financial aspect

In the last two years the EDA industry has been severely impacted by the financial turmoil that hit the entire developed countries sector. According to data provided by Jay Vleeschhouwer, arguably the most senior financial analyst covering our industry, the total revenue of the industry has shrunk by about 20% from an actual in 2007 of $5.15 billion to an estimated $4.18 billion in the just concluded 2009 calendar year.

Another interesting number to look at is the growth experienced by EDA from 2005 to 2007. In that period the industry went from a total revenue of $4.09 billion in 2005 to the afore mentioned $5.15 billion in 2007. The previous growth and the later decline are almost symmetrical, and we are back to the 2005 revenue level but with a dollar that is worth less. Thus in the last four years our industry has seen no growth. Can we start growing again in 2010?

Probably a bit, but not by much, especially if one takes the projected inflation into account. The inflation should not be high, around 1.5%, and EDA vendors should be able to modify their prices to reflect that. On the positive side, as the contents of the responses show, some markets should show growth in revenue. On the negative side, if further consolidation in the semiconductor manufacturing sector occurs, revenue will be negatively impacted. Above all this, the availability of consumers discretionary funds, could cast a depressing shadow, lowering demand for electronics products.

The significant erosion of net worth, or as in the USA, perceived net worth based on past inflated real estate evaluations, has increased the savings rate of consumers who are now more likely to postpone discretionary spending than to respond to the marketing efforts of distributors of electronics gadgets. I personally, and I am sure most readers also do, know well-to-do persons who are "making do" with cell phone that are two years old, for example, and do not plan to replace them this year. The initial positive indicators following the Christmas shopping period indicated a willingness of consumers to spend. Unfortunately as the real final numbers become available, reality is actually the opposite. Retailers did not realize the income they expected, and more consolidation in this sector is likely.

We cannot take Silicon Valley as an example of consumers appetites. What goes on in the Valley does not go on in the rest of the consuming world. The Chinese market is the major hope of electronics companies. Not just for the appetite of Chinese consumers for electronics gadgets, but also for the demand of products, like automobiles, that have a high electronics content. Of course on the positive side, if a Chinese person purchases a cell phone for the first time, he is likely to purchase the latest model. To a lesser extent this is also true for India, Brazil, and Russia. But China is now moving to curb inflation, by increasing bank reserve requirements and thus making loans, especially consumers loans, harder to get.

My prediction for 2010 is that the EDA industry will end the year with revenue between $4.25 and $4.30 billion. On January 28 Jay Vleeschhouwer, a leading EDA analyst now at Ticonderoga Securities, forecasted a growth to between $4.27 and $4.33 billion. My forecast results were arrived at totally independently from Jay's, but the results are quite similar. This is either good news or an indicator that Jay and myself really want this industry to succeed.

Although modest, this growth will be significant in showing that the sector still has vitality and creativity, and that its management is competent. Should EDA fail to reach the lower of the estimate, it will result in significant consolidation in the industry. In order to stay in business companies will seek to merge or at least find new business alliances. The goal will be not just to shrink overhead expenses, but to leverage the value of individual products by packaging offerings from more than one company into a total flow that takes the user from architectural design to manufacturable silicon.

Potential EDA Growth Sectors

My analysis of the responses shows three areas of concentration: implementation choices in semiconductors, architectures, and methods. The use of FPGA devices continues to grow and shows no signs of flattening, the high cost of verification facilitates the growth of IP use and reuse. Power concerns aid in the use of multicore and thus architectural design, communication and graphics requirements demand investments in analog and RF, and the growing cost of development requires better methods and standards.


Semiconductors industry forecasts predict a 7% growth in revenue this year, driven mostly by computers and cell phone purchases. I believe that a major factor in the growth of computer sales, mainly laptops, will be the introduction of Windows 7 by Microsoft. This operating systems is much more user friendly than Vista and many people will want to switch and at the same time take the opportunity to upgrade their hardware platform.

Not much is new in cell phones, as the majority of users do not take full advantage of the G4 connectivity characteristics. But there is still an enormous growth potential for new customers in developing countries and certainly some users will upgrade older phones to newer ones, if for nothing else, peer pressure. These two market segments will require new designs and thus continual as well as additional investments in EDA tools.

The positive aspects are balanced by two negative factors in the semiconductors industry: consolidation and costs. A new 300 millimeters fab capable of supporting 45 or 32 nm processes costs a minimum of $6 billion, an enormous investment even for the largest of semiconductors companies. These costs have generated a movement toward consolidation in the industry. Globalfoundries is the best example of the consolidation. This consolidation impacts EDA vendors revenue in two ways: consolidation of engineering department that lowers the headcount, and less business units negotiating license agreements.

FPGA is a sector that has proven sustained growth in the past few years, and that growth will continue in 2010. Mentor Graphics is the company that has been the leader in providing independent EDA tools to the segment, although both Cadence and especially Synopsys are making inroads in this market. All three companies, in addition to much smaller specialty vendors, will continue to benefit from this growth. It would not be prudent, though, to consider the growth in this sector as a net growth of total EDA revenue, since a significant number of FPGA designs are direct replacement for designs that were done as custom ASIC in the past. In addition, may be unfortunately, FPGA tools still have a lower license price than ASIC tools. This in spite of the complexity of designs now implemented in FPGA devices.

Architectural Design

With larger chips comes increased architectural complexity. The use of multiple execution engines on one chip has now become a regular approach to increase execution speed, to partition power use, and to facilitate design reuse. The focus on consumers driven markets require vendors to both modify existing features, and add new ones without having to redesign an entire chip. Hitting a market window as it opens versus being even only a couple of months late, means making a profit versus loosing a significant amount of money. Thus a schedule slip due to design complexity means failure.

What has been labels the ESL market, and the IP market are therefore good candidates for growth. In the IP sector the growth will come from an increase in the use of existing cores, as well as the introduction and use of new IP products.

1 | 2  Next Page »

You can find the full EDACafe event calendar here.

To read more news, click here.

-- Gabe Moretti, EDACafe.com Contributing Editor.

Review Article Be the first to review this article

 Advanced Asembly

Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
You’re Invited! CEO Outlook May 18
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Automating the UVM Register Abstraction Layer (RAL)
SoC Physical Design Engineer for Qualcomm at Austin, Texas
Circuit Design & Layout Simulation Engineer - Co-Op (Spring 2021) for Global Foundaries at Santa Clara, California
ASIC Engineer for Juniper Networks at Sunnyvale, California
Staff SerDes Applications Design Engineer for Xilinx at San Jose, California
Senior HID Sensor Algorithm Architect for Apple Inc at Cupertino, California
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
Upcoming Events
DVCon China 2021 at Shanghai China - May 26, 2021
CadenceLIVE Americas 2021 at United States - Jun 8 - 9, 2021
DesignCon 2021 at San Jose McEnery Convention Center San Jose, CA San Jose CA - Aug 16 - 18, 2021
SEMICON Southeast Asia 2021 Hybrid Event at Setia SPICE Convention Centre Penang Malaysia - Aug 23 - 27, 2021

© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise