The EDA & MCAD/MCAE Almanac – Nominal Q2 2012

 

In December 2011 a comprehensive report that combined financial data from both the EDA and MCAD/MCAE industries for the third quarter of 2011, was the EDA WEEKLY initially posted in EDACafe.com and MCADcafe.com on December 12, 2011, entitled,

 

“The EDA and MCAD/MCAE Almanac – Nominal Q3 2011”

 



April 23, 2012

 

Next in the sequence was a “Mini-Almanac” summary report posted as a BLOG-ONLY version on April 23, 2012, which carried the masthead as follows: 

  Industry Commentary

-----------------------------------------------------------------------------------------------

Dr. Russ Henke
The writer of the following article has posted over 100 articles on EDACafe.com since 2003, in the form of Quarterly Commentaries on the worldwide EDA. EDA IP, and MCAD/MCAE Industries as well as monthly editorials covering vendors, products, finances and new developments. Beginning April 2012 these … More ».........

“New Commentary: EDA & MCAD/MCAE Industry Mini-Almanac – Nominal Q4 2011” 

 


June 25, 2012

 

Next was the full-fledged June 25, 2012 edition of the COMMENTARY, entitled,

EDA & MCAD/MCAE Industry Almanac – Nominal Q1 2012”

http://www10.edacafe.com/nbc/articles/view_article.php?section=Commentary&articleid=1099325


which covered in detail vendor financial reports
issued by the relevant vendors between April 25, 2012 and May 23, 2012.

This June 25, 2012 Nominal Q1 2012 issue was a full-fledged article that stood on its own, but it contained the seeds of a potential cross-referencing ENTRY that would characterize subsequent quarterly Almanac issues to come:    


                             

Namely, it contained an “Important Message” relating to the contents of the previous Q1 2012 Almanac, and it appeared on July 19, 2012 in the daily EDACafe NEWSLETTER. THE ESSENTIAL MESSAGE OF THIS PART II POSTING stated as follows:

The June 25, 2012 Almanac reports in detail on the financial results for nominal Q1 2012 of the following software vendors:

 

 

Keen readers immediately noticed that as recent as June 25, the EDA list of covered vendors was only four (4) vendors in length instead of the usual “Group of Five,’’ or “G5;” likewise for the MCAD/MCAE list. Indeed, readers of the June 25, 2012 Almanac and other EDA Commentaries of the recent past surely noticed that a replacement for MAGMA in these electronic newsletters had not yet been named. (MAGMA was acquired by Synopsys late last year).

The July 19, 2012 notice officially informed readers that Altium Limited had been restored as the fifth member of the EDA G5 (Group-of-Five), after a one-year absence.

 

 


July 27, 2012  

 

This led directly to the BLOG of July 27, 2012, which contained an advanced release of one of the CHAPTERS (TWO) of the Q2 2012 Almanac, which CHAPTERS were all originally scheduled for 100% simultaneous September posting:

 

 

Industry Commentary

Dr. Russ Henke
The writer of the following article has posted over 100 articles on EDACafe.com since 2003, in the form of Quarterly Commentaries on the worldwide EDA and EDA IP Industries as well as monthly Editorials covering vendors, products, finances and new developments. Beginning April 2012 these … More »

The EDA and MCAD/MCAE Almanac – Nominal Q2 2012 Part II  

Finally, today July 27, 2012 you have this new Blog:

Altium announces unaudited update on financial
performance for year to June 30, 2012

 

On July 25, 2012, Electronics design software company Altium Limited announced an unaudited update on its financial results for the financial year ending June 30, 2012.

Nominal Q2 2012 Update

For Nominal Q2 2012, the three months ending June 30, 2012 Altium sales grew to US$20.1 million.

For the Fiscal Year 2012 overall, sales were US$61.2 million, up 21% over FY2011.

 

# # # # #

 

The following chart was prepared by the EDA Contributing Editor from data reported for Altium sales after three quarters of Fiscal 2012, which are compared in the chart below vs. three quarters of Fiscal 2011:

 

The factors in the last column for each area of the world served by Altium are generated by dividing sales totals of three quarters YTD for 2012 by the three quarters YTD for Fiscal  2011, after converting any euro numbers to US$.

« Previous Page 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8  Next Page »
Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Ansys’ John Lee on Cultivating Trust within his Team
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
The Role of the Portable Stimulus Standard in VLSI Development
Jobs
Senior SOC Design Engineer for Nvidia at Santa Clara, California
Advanced Mechanical Engineer for General Dynamics Mission Systems at Marion, Virginia
RF Design Engineer for Blockwork IT at San Francisco, California
FPGA Design Verification Engineer for General Dynamics Mission Systems at Dedham, Massachusetts
Hardware Engineer for PTEC Solutions at Fremont, California
Design Verification Engineer for Blockwork IT at Milpitas, California
Upcoming Events
SEMICON Southeast Asia 2024 at MITEC Kuala Lumpur Malaysia - May 28 - 30, 2024
3D & Systems Summit - Heterogeneous Systems for the Intelligently Connected Era at Hilton Dresden Hotel An der Frauenkirche 5, 01067 Dresden Germany - Jun 12 - 14, 2024
2024 IEEE Symposium on VLSI Technology & Circuits at HILTON HAWAIIAN VILLAGE HONOLULU HI - Jun 16 - 20, 2024
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise