Toshiba Launches 4-channel H-bridge Motor Driver IC with Maximum Ratings of 40V and 3.5A

TOKYO — (BUSINESS WIRE) — May 31, 2017Toshiba Corporation's (TOKYO:6502) Storage & Electronic Devices Solutions Company today announced the launch of “TB67H452FTG,” a 4-channel H-bridge motor driver IC offering a high voltage of 40V and current of 3.5A. The new IC is suited for small consumer products. Shipments start today.

This Smart News Release features multimedia. View the full release here: http://www.businesswire.com/news/home/20170531006583/en/

Toshiba: "TB67H452FTG," a 4-channel H-bridge motor driver IC offering a high voltage of 40V and curr ...

Toshiba: "TB67H452FTG," a 4-channel H-bridge motor driver IC offering a high voltage of 40V and current of 3.5A. (Photo: Business Wire)

In recent years, more and more products require high drive current with low power supply voltage, particularly small consumer products such as digital cameras, electric tools, notebook PCs, tablets and small domestic robots.

The new IC can supply an output current of up to 3.5A with low power supply voltage, suiting it for battery-powered applications, such as 7.2V power supply for small domestic robots, electric tools and surveillance cameras.

The new motor driver IC has both DC brushed motor drive and stepping motor drive interfaces, making possible combinations such as two DC brushed motor channels and one stepping motor channel. Customers have the freedom to select from a line-up that supports a wide range of devices.

Toshiba will continue to deliver products that meet the needs of customers by promoting the development of a diverse portfolio of motor drivers tailored to market trends.

Main Features of New Product
1. High drive current with low power supply voltage
Suited for applications that need high current with low power voltage.

2. Drives two or more motors
Can drive up to four brushed motors simultaneously; in stepping motor mode, can simultaneously drive two stepping motors.

3. Small package
Packaging in a small QFN package support customers in reducing heat problems and simplifying PCB design patterns to handle heat dissipation. Also realize an affordable solution in terms of space and cost.

4. Low heat generation
Heat generation for a 2-channel simultaneous drive is reduced by low on resistance (0.6 Ω or less (upper + lower)).

5. Low power consumption
A built-in sleep function by external pin control reduces IC current consumption at stand-by.

6. Built-in error detection circuits
Incorporates thermal shutdown and over current detection circuits. The safety and reliability of equipment are increased by the error (ERR) signals they output during operation.

 

Main Specifications

Part number  

TB67H452FTG

Control I/F CLK-IN
Absolute maximum ratings

• Brushed DC motor mode
   40V, 3.5A (single mode); 40V, 5.0A (large mode)
• Stepping motor mode
   40V, 3.5A (single mode); 40V, 5.0A (large mode)

Drive channels Brushed motor: 4 channels; Stepping motor: 2 channels
Package QFN48-P-0707-0.50
Step resolution mode Full, half, and quarter step resolution (in stepping motor mode)
Other features  

Built-in Sleep function cuts consumption current during standby.
Built-in error detection functions: over heat detection, over current detection and low voltage detection
Built-in error detection flag output function
Supports power-on sequence by the single power drive

 

1 | 2  Next Page »



Review Article Be the first to review this article

Featured Video
Editorial
Roberto FrazzoliEDACafe Editorial
by Roberto Frazzoli
Special Report: Machine Learning in EDA
More Editorial  
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Remembering Jim Hogan
Colin WallsEmbedded Software
by Colin Walls
Variable declarations in C – plenty of pitfalls
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
AUGER: Celebrating Our Users
Jobs
Circuit Design & Layout Simulation Engineer - Co-Op (Spring 2021) for Global Foundaries at Santa Clara, California
ASIC Engineer for Amazon at seattle, Washington
Pre-silicon Design Verification Engineer for Intel at Santa Clara, California
Technical Product Manager- SISW-EDA 238452 for Siemens AG at Fremont, California
Sr Engineer - RF/mmWave IC Design for Global Foundaries at Santa Clara, California
Staff SerDes Applications Design Engineer for Xilinx at San Jose, California
Upcoming Events
IPC APEX EXPO 2021 Goes Virtual at - Mar 8 - 12, 2021
ADAS Sensors 2021 at The Henry Hotel 300 Town Center Drive Dearborn MI - Apr 7 - 8, 2021
ISQED'21 - 22nd International Symposium at POB 607 Los Altos CA - Apr 7 - 9, 2021
SEMI MEMS & Sensors Industry Group (MSIG), MSTC 2021 at United States - Apr 13 - 15, 2021



© 2021 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise