ESD Alliance Reports EDA Industry Revenue Increase for Q3 2019

MILPITAS, Calif., Jan. 07, 2020 (GLOBE NEWSWIRE) -- The Electronic System Design (ESD) Alliance Market Statistics Service (MSS) today announced that the Electronic Design Automation (EDA) industry revenue increased 8.9 percent for Q3 2019 to $2567.7 million, compared to $2358.3 million in Q3 2018. The four-quarters moving average, which compares the most recent four quarters to the prior four quarters, increased by 6.8 percent.   

“The EDA industry reported increased revenue in Q3 compared to Q3 2018, including double digit growth in the CAE, PCB/MCM, and IC Physical Design & Verification categories,” said Walden C. Rhines, CEO Emeritus of Mentor, a Siemens Business. “Regionally, the Americas also reported double digit growth in Q3.”

Companies that were tracked employed 44,950 professionals in Q3 2019, an increase of 6.6 percent compared to the 42,162 employed in Q3 2018, and up 1.4 percent compared to Q2 2019.

The complete quarterly MSS report, containing detailed revenue information broken out by both categories and geographic regions, is available to members and associates of the ESD Alliance.

Revenue by Product Category
Computer Aided Engineering (CAE) generated revenue of $838.3 million in Q3 2019, which represents a 10.8 percent increase compared to Q3 2018. The four-quarters moving average for CAE increased 7.0 percent.

IC Physical Design & Verification revenue was $557.6 million in Q3 2019, a 17.2 percent increase compared to Q3 2018. The four-quarters moving average increased 6.9 percent.

Printed Circuit Board and Multi-Chip Module (PCB & MCM) revenue of $240.5 million for Q3 2019 represents an increase of 19.8 percent compared to Q3 2018. The four-quarters moving average for PCB & MCM increased 10.3 percent.

Semiconductor Intellectual Property (SIP) revenue totaled $835.9 million in Q3 2019, a 3.7 percent increase compared to Q3 2018. The four-quarters moving average increased 7.9 percent.

Services revenue was $95.4 million in Q3 2019, a decrease of 19.9 percent compared to Q3 2018. The four-quarters moving average decreased 9.9 percent.

Revenue by Region
The Americas, EDA’s largest region, purchased $1169.9 million of EDA products and services in Q3 2019, an increase of 10.4 percent compared to Q3 2018. The four-quarters moving average for the Americas increased 1.0 percent.

Revenue in Europe, the Middle East, and Africa (EMEA) increased 0.1 percent in Q3 2019 compared to Q3 2018 on revenues of $351.1 million. The EMEA four-quarters moving average decreased 2.3 percent.

Third quarter 2019 revenue from Japan decreased 9.4 percent to $219.3 million compared to Q3 2018. The four-quarters moving average for Japan decreased 5.7 percent.

The Asia/Pacific (APAC) region revenue increased to $827.5 million in Q3 2019, an increase of 5.7 percent compared to the third quarter of 2018. The four-quarters moving average increased 13.5 percent.

The complete MSS report, available to the ESD Alliance members, contains additional detail for countries in the Asia/Pacific region.

About the MSS Report

The ESD Alliance Market Statistics Service reports EDA industry revenue data quarterly and is available to Alliance members. Both public and private companies contribute data to the report. Each quarterly report is published approximately three months after quarter close. MSS report data is segmented as follows: revenue type (product licenses and maintenance, services, and SIP), application (CAE, PCB/MCM Layout, and IC Physical Design & Verification), and region (the Americas, Europe Middle East and Africa, Japan, and Asia Pacific), with many subcategories of detail provided. The report also tracks total employment of the reporting companies.

About the Electronic System Design Alliance
The Electronic System Design (ESD) Alliance, a SEMI Strategic Association Partner, is the central voice to communicate and promote the value of the semiconductor design ecosystem as a vital component of the global electronics industry. As an international association of companies providing goods and services throughout the semiconductor design ecosystem, it is a forum to address technical, marketing, economic and legislative issues affecting the entire industry. For more information about the ESD Alliance, visit http://esd-alliance.org.

The information supplied by the ESD Alliance is believed to be accurate and reliable, but the ESD Alliance assumes no responsibility for any errors that may appear in this document. All trademarks and registered trademarks are the property of their respective owners.

Press Contacts:                                                                                                

Paul Cohen, ESD Alliance, A SEMI Strategic Association Partner, 978-769-2106                     
Suzanne Graham, Mentor, A Siemens Business, 503-685-7789    

Primary Logo




Review Article Be the first to review this article
Aldec

 True Circuits: Ultra PLL

Featured Video
Latest Blog Posts
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
Automation of the UVM Register Abstraction Layer
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Virtual 2020 CEO Outlook Set for June 17
Colin WallsEmbedded Software
by Colin Walls
Multiple constructors in C++
Jobs
Senior Application Engineer Formal Verification for EDA Careers at San Jose and Austin, California
Senior Analog Design Engineers #5337 for EDA Careers at EAST COAST, California
Software Engineer for EDA Careers at RTP, North Carolina
Senior Layout Engineer for EDA Careers at EAST COAST, California
Upcoming Events
Sensors Expo & Conference at McEnery Convention Center 150 W. San Carlos Street SAN JOSE CA - Jun 22 - 24, 2020
Nanotech 2020 Conference and Expo at National Harbor MD - Jun 29 - 1, 2020
IEEE Computer Society Annual Symposium on VLSI (ISVLSI) 2020 at Limassol Hotel, Amathus Area, Pareklisia Cyprus - Jul 6 - 8, 2020
57th Design Automation Conference 2020 at San Francisco CA - Jul 19 - 23, 2020



© 2020 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise