Atmel Launches Industry's Lowest-Power 1.8V CPLD Family with 5 uA Standby Power Consumption
[ Back ]   [ More News ]   [ Home ]
Atmel Launches Industry's Lowest-Power 1.8V CPLD Family with 5 uA Standby Power Consumption

The only CPLD with on-chip EEPROM. Macrocell architecture doubles logic density.

SAN JOSE, Calif., Dec. 4 /PRNewswire/ -- Atmel(R) Corporation (NASDAQ: ATML), announced today its ATF15xxBE family of ROHS-compliant, 1.8V CPLDs with standby power consumption of just 5 uA -- over 60% less power drain than the nearest competing CPLD. Operating power consumption is 1 mA at 20 MHz or less. Available in densities ranging from 32 to 128 macrocells, ATF15xxBE CPLDs can be used to implement system watchdog, MCU I/O port expansion, memory interface, LCD display module drivers, and voltage translators.

Their ultra-low standby power consumption makes the ATF15xxBE PLDs ideal for applications that spend the majority of their time in standby mode. These include smart phones, keypad scanners, and handheld appliances as well as toys using infrared transmitters with low security needs.

ATF15xxBE CPLDs are the only CPLDs on the market that offer up to 32 Kbits of on-chip EEPROM for the storage of constants, OEM proprietary data, end- product ID, or other data.

Unique macrocell architecture doubles logic utilization. ATF15xxBE CPLDs have a unique macrocell architecture with independent feedback paths for both the register and combinatorial logic that fully exploits macrocell resources. Conventional CPLDs incorporate macrocells that have only one feedback path. If the register is being used to latch data, the combinatorial logic in that cell cannot be utilized at all. Atmel's dual-path architecture allows both register and combinatorial macrocell resources to be fully utilized virtually all the time, in effect doubling the amount of available logic, ATF15xxBE CPLDs frequently allow designers to implement their system in a smaller, less expensive device.

Logic doubling is automatic. Atmel's ProChip Designer(R) fitter automatically checks CPLD resource utilization and implements logic doubling without any user action.

Compatible with 5V ATF15xxAS and Altera's EPM3000 and EPM7000 CPLDS. The ATF15xxBE industry standard pin out is compatible with Atmel's 3.3V ATF15xxASV and 5V ATF15xxAS families, and offers a lower-power alternative to Altera's EPM3000 and EPM7000 CPLDs, Xilinx's XC2CxxA and Lattice's LC40xxZ CPLDs.

Downloadable Mentor Graphics(R)-based tools. Atmel's ProChip Designer 4.0 integrates Mentor Graphic's industry-standard design entry, synthesis and simulation software from within Atmel's proprietary ProChip Designer fitting software. Designers can use Atmel's OEM version of Precision(R) RTL Synthesis and/or ModelSim(R) Simulation environment to design the ATF15xxBE CPLD family. Third-party programming vendors such as BP Microsystems, Data I/O(R), Hilo, and EE tools also support stand-alone programming of the ATF1502BE.

Pricing and Availability. Samples of the ATF1502BE and ATF1504BE CPLDs are available now in -5 ns and -7 ns speed grades in fully green, ROHS-compliant TQFP packages. Pricing for ATF1502BE starts at USD $.95 for 10k units. The ATF1504BE starts at USD $1.95 for 10k units. The 128 macrocell ATF1508BE CPLD will be available in the second quarter of 2007.

About Atmel

Atmel is a worldwide leader in the design and manufacture of microcontrollers, advanced logic, mixed-signal, nonvolatile memory and radio frequency (RF) components. Leveraging one of the industry's broadest intellectual property (IP) technology portfolios, Atmel is able to provide the electronics industry with complete system solutions. Focused on consumer, industrial, security, communications, computing and automotive markets, Atmel ICs can be found Everywhere You Are(R).

NOTE: Atmel(R), logo and combinations thereof, Everywhere You Are(R) , and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Mentor Graphics(R), Precision(R) and ModelSim(R) are registered trademarks of Mentor Graphics Corporation or its subsidiaries in the United States and other countries. Other terms and product names may be trademarks of others.


Atmel's ATF1502BE product information may be retrieved at: PLD%2FCPLD&part_id=3832

For further information on the SPLD/CPLD Family, go to .

    Press Contacts:
    Yadvindra Dhami, Product Marketing Manager
    Phone: (+1) 408-436-4166, Email: 
Email Contact

    Helen Perlegos, Public Relations - USA and Asia Pacific Rim
    Phone: (+1) 408 487-2963, Email: 
Email Contact

    Veronique Sablereau, Corporate Communications Manager - Europe
    Phone: +33 1 30 60 70 68, Fax: + 49 71 31 67 24 23
Email Contact

Web site: