PMI® at 50.1%; GDP Growing at 2.1%; February 2020 Manufacturing ISM® Report On Business®

TEMPE, Ariz., March 2, 2020 — (PRNewswire) —  Economic activity in the manufacturing sector grew in February, and the overall economy grew for the 130th consecutive month, say the nation's supply executives in the latest Manufacturing ISM® Report On Business®.

The report was issued today by Timothy R. Fiore, CPSM, C.P.M., Chair of the Institute for Supply Management® (ISM®) Manufacturing Business Survey Committee: "The February PMI® registered 50.1 percent, down 0.8 percentage point from the January reading of 50.9 percent. The New Orders Index registered 49.8 percent, a decrease of 2.2 percentage points from the January reading of 52 percent. The Production Index registered 50.3 percent, down 4 percentage points compared to the January reading of 54.3 percent. The Backlog of Orders Index registered 50.3 percent, an increase of 4.6 percentage points compared to the January reading of 45.7 percent. The Employment Index registered 46.9 percent, an increase of 0.3 percentage point from the January reading of 46.6 percent. The Supplier Deliveries Index registered 57.3 percent, up 4.4 percentage points from the January reading of 52.9 percent. The Inventories Index registered 46.5 percent, 2.3 percentage points lower than the January reading of 48.8 percent. The Prices Index registered 45.9 percent, down 7.4 percentage points as compared to the January reading of 53.3 percent. The New Export Orders Index registered 51.2 percent, a decrease of 2.1 percentage points as compared to the January reading of 53.3 percent. The Imports Index registered 42.6 percent, an 8.7-percentage point decrease from the January reading of 51.3 percent.

"Comments from the panel were generally positive, with sentiment cautious compared to January. The PMI® remained in expansion territory, but at a weak level. Demand slumped, with (1) the New Orders Index contracting at a weak level, despite new export order expansion, (2) the Customers' Inventories Index remaining at 'too low' status and (3) the Backlog of Orders Index expanding for the first time in several months, but at a slow rate. Consumption (measured by the Production and Employment indexes) contributed negatively (a combined 3.7-percentage point decrease) to the PMI® calculation. Inputs — expressed as supplier deliveries, inventories and imports — strengthened in February, due primarily to supplier deliveries expanding, offset partially by inventories declining. Despite imports contraction returning at a strong rate, inputs contributed positively to the PMI® calculation, a reversal from the previous month. (The Supplier Deliveries and Inventories indexes directly factor into the PMI®; the Imports Index does not.) Prices returned to contraction, at moderately strong levels.

"Global supply chains are impacting most, if not all, of the manufacturing industry sectors. Among the six big industry sectors, Food, Beverage & Tobacco Products remains the strongest, followed by Computer & Electronic Products. Petroleum & Coal Products is the weakest. Overall, sentiment this month is marginally positive regarding near-term growth," says Fiore.

Of the 18 manufacturing industries, the 14 that reported growth in February — listed in order — are: Wood Products; Furniture & Related Products; Plastics & Rubber Products; Printing & Related Support Activities; Paper Products; Textile Mills; Primary Metals; Food, Beverage & Tobacco Products; Computer & Electronic Products; Miscellaneous Manufacturing; Electrical Equipment, Appliances & Components; Fabricated Metal Products; Machinery; and Chemical Products. The three industries reporting contraction in February are: Petroleum & Coal Products; Transportation Equipment; and Nonmetallic Mineral Products.

WHAT RESPONDENTS ARE SAYING

  • "There are always supply chain challenges with Lunar New Year shutdowns, and this year is no different. Coronavirus is wreaking havoc on the electronics industry. Companies are delayed in starting up production, which is resulting in longer lead times, constraints and increased pricing. It's a mad dash to dual source stateside in case China isn't back online soon." (Computer & Electronic Products)
  • "January started out strong, but the effects of the virus in China [and] the continued grounding of the 737 Max have suppressed new orders. We are still expected to be flat to slightly up [year-over-year] for 2020 sales, based on those issues." (Chemical Products)
  • "Layoffs are here." (Transportation Equipment)
  • "Coronavirus and its impact on the supply chain: We will see some softness in demand, but also [experience] havoc on items sourced from China that may cause significant delays to production." (Food, Beverage & Tobacco Products)
  • "Energy markets seem to be responding to a potential drop in demand that may be related to responses [to] the coronavirus." (Petroleum & Coal Products)
  • "Coronavirus continues to be front and center as a major supply chain risk to our company. Access to information in China — from our supply base and customers — is slow to come by." (Fabricated Metal Products)
  • "Sales continue to be strong, with the supply base able to support as required. The major concern is the China virus and what that crisis could affect in getting parts. The company is putting plans in place to source out locations, especially in the U.S., for parts." (Machinery)
  • "Business continues to be strong. We had a little January slowdown, but February has been fantastic." (Plastics & Rubber Products)
  • "We have seen an increase of sales for our products." (Furniture & Related Products)
  • "Current favorable forecast to budget for first-quarter sales." (Primary Metals)

 

MANUFACTURING AT A GLANCE

February 2020

Index

Series
Index

Feb

Series
Index

Jan

Percentage

Point

Change

Direction

Rate of
Change

Trend*
(Months)

PMI®

50.1

50.9

-0.8

Growing

Slower

2

New Orders

49.8

52.0

-2.2

Contracting

From Growing

1

Production

50.3

54.3

-4.0

Growing

Slower

2

Employment

46.9

46.6

+0.3

Contracting

Slower

7

Supplier Deliveries

57.3

52.9

+4.4

Slowing

Faster

4

Inventories

46.5

48.8

-2.3

Contracting

Faster

9

Customers' Inventories

41.8

43.8

-2.0

Too Low

Faster

41

Prices

45.9

53.3

-7.4

Decreasing

From Increasing

1

Backlog of Orders

50.3

45.7

+4.6

Growing

From Contracting

1

New Export Orders

51.2

53.3

-2.1

Growing

Slower

2

Imports

42.6

51.3

-8.7

Contracting

From Growing

1

OVERALL ECONOMY

Growing

Slower

130

Manufacturing Sector

Growing

Slower

2


1 | 2 | 3 | 4 | 5 | 6 | 7 | 8  Next Page »
Featured Video
Latest Blog Posts
Bob Smith, Executive DirectorBridging the Frontier
by Bob Smith, Executive Director
Ansys’ John Lee on Cultivating Trust within his Team
Anupam BakshiAgnisys Automation Review
by Anupam Bakshi
The Role of the Portable Stimulus Standard in VLSI Development
Jobs
Electrical Engineer - ASIC/FPGA for General Dynamics Mission Systems at Florham Park, New Jersey
RF Design Engineer for Blockwork IT at San Francisco, California
Senior Staff Engineer for Samsung Electronics at San Jose, California
Design Verification Engineer for Blockwork IT at Milpitas, California
FPGA Design Verification Engineer for General Dynamics Mission Systems at Dedham, Massachusetts
Advanced Mechanical Engineer for General Dynamics Mission Systems at Marion, Virginia
Upcoming Events
SEMICON Southeast Asia 2024 at MITEC Kuala Lumpur Malaysia - May 28 - 30, 2024
3D & Systems Summit - Heterogeneous Systems for the Intelligently Connected Era at Hilton Dresden Hotel An der Frauenkirche 5, 01067 Dresden Germany - Jun 12 - 14, 2024
2024 IEEE Symposium on VLSI Technology & Circuits at HILTON HAWAIIAN VILLAGE HONOLULU HI - Jun 16 - 20, 2024
Design Automation Conference (DAC) 2024 at Moscone West, San Francisco CA - Jun 23 - 27, 2024



© 2024 Internet Business Systems, Inc.
670 Aberdeen Way, Milpitas, CA 95035
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering TechJobsCafe - Technical Jobs and Resumes GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise